Easy-Trim Universal Dry Verge System Terracotta (Box of 50) 
Code 5 Cast Lead - 1000mm x 6m 
Everbuild B1 Hand Held Expanding Fire Rated Foam - Pink 750ml (Box of 12) 
Hambleside Danelaw Double Roman Tile Vent, TV15/3 - Slate Grey (Box of 5) 
Klober Universal Tile Vent Antique Red KG9854 (Box of 10) 
Roughneck® Gorilla Bar Twin Pack - 35cm & 55cm (14in & 22in) 
Timco Mixed Carriage Bolts, Nuts and Washers Grab Pack 
OX Pro Brick Trowel Philadelphia Pattern - 10"/250mm 
Siroflex Seal & Fix Hybrid Adhesive 
Armatool Mop Heads Size 12 
Everbuild Stixall Extreme Power – White 290ml 
Everbuild KOS Fire Cement Buff – 2kg 
Hambleside Danelaw Single Pantile Roof Tile Vent, TV10/8 - Slate Grey (Box of 5) 
Bond It Contractors Grade PVA White 500ml - Box of 20 
Permavent Black Breather Membrane – 1m x 20m 
Soudal Insulating Foam Genius Gun 750ml - Champagne (Box of 12) 
OX Tools 12 inch / 300mm Pro Stainless Steel Plasterers Mud Pan 
Code 7 Cast Lead - 914mm x 3m 
Freeflow 65mm Square Down Pipe Clip Standard - White 
OX Tools Trade Bucket, Black - 15 Litre 
Code 6 Cast Lead - 850mm x 3m 
Samac Snowguard - 225mm x 2m 
ALM Code 3 Milled Lead - 180mm x 3m 
OX Pro Brick Hammer - 24 oz 
ALM Code 8 Milled Lead - 1200mm x 3m 
Cromar Alphachem Liquid Mortar Tone - Black 5L 
Uses
The Aluminum Paint by Cromar is an exceptional, high-performance roof coating that defends against the harmful effects caused by sunlight, reflecting UV rays away from the substrate below and extending the roof's lifespan. Cromar's aluminium paint can be applied directly to bituminous roofs, which is perfect for protecting them, whether it's roofing felt or bitumen paint. Other application areas include exposed steel, corrugated iron, and other metallic surfaces; even mineral surfaces, including concrete, are suitable.
Preparation
Before commencing the application, preparing the area is vital to achieve optimal and professional results. Start by cleaning the surface, removing contaminants that can hinder the adhesion of the paint, including dirt, dust, grease, oil, loose debris and even organic growth. A stiff brush is the best tool to clear the surface of impurities, but a fungicide is recommended for organic growth as it will kill them and prevent them from returning. Roofing felt should receive a primer, and then they're ready for the aluminium paint.
Application
- Any fresh bitumen coating on the roof must have 3 - 5 days of curing before applying the aluminium paint.
- Stir it thoroughly before use.
- Using a brush or airless spray, apply the first coat to the surface and allow it to dry.
- Once it's dried, apply the second coat to the surface.
- Take care not to apply either coat too thick; otherwise, bronzing may occur. Bronzing can also happen if rain falls before it's cured.
