Name: Everbuild 206 Strike Release Oil – 5 Litre
SKU: STRIKE5
Availability: OutOfStock

Uses

The 206 Strike Release Oil by Everbuild is an excellent product that's vital in the manufacturing and application of concrete. It uses its solvent and mineral oil-free emulsion to enable concrete shuttering, allowing the safe removal of the shuttering without damaging the existing concrete. Other applications this product can be used for include;

206 Strike Release Oil acts as a release agent for smooth, non-absorbent formwork, absorbent formwork, heated formwork (up to 70°C) and textured formwork.

Preparation

All formwork should be cleaned and dry before application. Any residues of rust or concrete must be removed.

Application

Stir the product thoroughly before using
Apply undiluted by spray, brush or roller
Apply a thin, even coverage to the surface; if you overapply this product, you'll cause 'dusting' on the surface.
Any excess material in moulds should be mopped up before concrete placement.
For new and unsealed timber or other high-absorbent formwork, pre-treatment is recommended with a second coat before use
After application, an evaporation period of 20 minutes (at + 20°C) should be observed before casting.

Limitations and Notes

Only apply a thin film; overdosing can cause dusting.

Additional information

Product Type	Building Supplies
Appearance / Colour	White liquid
Density	Approx. 0.97 g/cm3
pH-Value	8.0 ± 1.0
Yield	50-60 m²/litre for steel and plastic 40-50 m²/litre for coated plywood 20-30 m²/litre for untreated timber
Storage Conditions	Store in dry conditions at temperatures between +5°C and +25°C. Protect from direct sunlight and frost. If frozen and / or if precipitation has occurred, the product may be used after thawing slowly at room temperature followed by intensive remixing.

Technical Data Sheet

Safety Data Sheet

Product Type

Building Supplies

Appearance / Colour

White liquid

Density

Approx. 0.97 g/cm3

pH-Value

8.0 ± 1.0

Yield

50-60 m²/litre for steel and plastic
40-50 m²/litre for coated plywood
20-30 m²/litre for untreated timber

Storage Conditions

Store in dry conditions at temperatures between +5°C and +25°C. Protect from direct sunlight and frost. If frozen and / or if precipitation has occurred, the product may be used after thawing slowly at room temperature followed by intensive remixing.

FREE Next Working Day Delivery on Orders over £10*

Everbuild 206 Strike Release Oil – 5 Litre

Uses

Preparation

Application

Limitations and Notes

Additional information

Technical Data Sheet

Safety Data Sheet

Product Information

Technical Data Sheet

Safety Data Sheet

Related Products

Ronseal Chalky Furniture Paint - 750ml

OX Trade Stubby Level - 100mm

Ronseal uPVC Paint - Royal Blue Satin 750ml

Recommended products

Standard Brush 4-Inch

Easy-Trim Universal Dry Verge Unit – Black

Cromapol Acrylic Roof Coating – 5kg

Get new offers to your inbox.