Timloc Non-Profile Tile Vent Brown (Box of 8) 
Bostik Express Cement Pointing Mortar Buff – 310ml 
Bond It Economy Sealant Gun - Blue 900ml 
ALM Code 3 Milled Lead - 1000mm x 6m 
Klober Universal Vent 125mm Adaptor - KG979000-1 
OB41 Electrical Contact Cleaner - 400ml 
Code 4 Cast Lead - 360mm x 6m 
Everbuild Exact Gap Foam - 750ml 
Bond It Rain-Mate All Weather Sealant Black EU3 - Box of 12 
OX Trade Medium Red Carpenters Pencils - Pack of 10 
Klober Dry Ridge System, 6m (KR5200) 
Everbuild 403 Concrete Hardener & Dustproofer – 5 Litre 
Code 8 Cast Lead - 180mm x 3m 
Bond It Caulk-Mate One Hour Decorators Caulk - White EU4 
Everbuild Stixall Extreme Power – Black 290ml 
Ronseal Precision Finish Brush - 1.5 Inch 
Bond It Contractors PVA - 2.5L White 
ALM Code 4 Milled Lead - 510mm x 3m 
Timloc 1206 Underfloor Vent Horizontal Rear Extension + 100mm 
OB41 Multi-Use Brake Cleaner - 400ml 
Klober Profile-Line Flat Tile Vent - Black KG9856-3-0450 (Box of 10) 
Bond It Anchor Bond Applicator - Blue 400ml 
Everbuild Lumberjack 30 Minute Polyurethane Wood Adhesive Liquid – 750ml 
ALM Code 6 Milled Lead Flashing - 150mm x 3m 
Klober Profile-Line Limarech Tile Vent - Antique Red KG9859-3-0116 (Box of 10) 
Soudal Soudatherm Roof 250 - 800ml (Box of 12) 
ALM Code 7 Milled Lead - 600mm x 3m 
Everbuild 501 PVA - 5 Litre 
Uses
The 406 Stabilising Solution by Everbuild is a high-quality, potent product that provides excellent sealing and bonding properties for badly weathered, chalky and dusty surfaces. It is crafted to restore these surfaces, prepare them for subsequent application, and allow you to decorate the area further. This effective stabiliser can be applied to;
- Brick
- Stone
- Render
- Concrete
- Plaster
- Pebbledashing
- Stucco
Preparation
Prepare the surface by removing all contaminants that can interfere with the stabiliser; this includes dirt, dust, oil, grease, etc. You must use a mould killer to eliminate the spores if you have any organic growth. Any flaking material should be brushed away using a stiff brush, creating a sound surface. Any signs of penetration damping should be treated first, and after finishing the preparation, the surface must be touched dry.
Application
This product is ready to use, please do not dilute it.
- Apply using a brush in one liberal coat
- If the surface is extremely porous, apply a second coat when the first dries
- Drying times are between 2 -4 hours, depending on the temperature and humidity.
Limitations and Notes
- As mentioned above, this product is ready-to-use and doesn't require any dilution.
- Dispose of any product and packaging correctly. Do not allow it to reach watercourses.
- This product cannot restore badly disintegrated render, rubber, etc. This will require removing and subsequent re-application
- Do not apply this product below 5°C.
- Do not apply this product externally if rain is imminent or due to fall within 6 hours.
