Bond It Heavy Duty Gun Foam Applicator 
Everbuild P14 System Inhibitor – 1 Litre 
Soudal Neutral Stay Fresh Sanitary Silicone Sealant – Clear 300ml (Box of 12) 
Siroflex Trade Strength Medium Viscosity Superglue - 20g 
Everbuild Silicone Spray - 400ml (Box of 12) 
ALM Code 5 Milled Lead - 450mm x 6m 
Ronseal Ultra Tough Hardglaze Clear Varnish - 750ml 
Timloc Universal Slate Roof Vent Adaptor Only 
Everbuild Anchorset Green 150 - Grey 150ml 
Bond It Trowel Mastic - Black 1L 
Everflex Galva Mate Duct Sealant - C3 
ALM Code 3 Milled Lead - 1200mm x 6m 
Isoflex Liquid Rubber - 4.5L 
Everbuild Everflex Lead Mate Sealant Grey - 295ml (Box of 25) 
ALM Code 8 Milled Lead - 450mm x 6m 
Soudal PVCu Cream Cleaner - 1L 
Soudal Genius Gun Gap Filling and Expanding Foam - 500ml 
Armatool Batten Gauge - Up to 14" 
Soudal Construction Silicone, Grey - 290ml 
Code 6 Cast Lead - 450mm x 3m 
Easy-Trim Lead R Flashing Smooth – 150mm x 5m 
Freeflow Round 112mm Gutter System 135° - Black 
Code 3 Cast Lead - 240mm x 6m 
ALM Code 7 Milled Lead - 600mm x 6m 
Siroflex Painters Caulk-It - 310ml 
Ronseal Wet Rot Wood Hardener - 250ml 
Uses
The 406 Stabilising Solution by Everbuild is a high-quality, potent product that provides excellent sealing and bonding properties for badly weathered, chalky and dusty surfaces. It is crafted to restore these surfaces, prepare them for subsequent application, and allow you to decorate the area further. This effective stabiliser can be applied to;
- Brick
- Stone
- Render
- Concrete
- Plaster
- Pebbledashing
- Stucco
Preparation
Prepare the surface by removing all contaminants that can interfere with the stabiliser; this includes dirt, dust, oil, grease, etc. You must use a mould killer to eliminate the spores if you have any organic growth. Any flaking material should be brushed away using a stiff brush, creating a sound surface. Any signs of penetration damping should be treated first, and after finishing the preparation, the surface must be touched dry.
Application
This product is ready to use, please do not dilute it.
- Apply using a brush in one liberal coat
- If the surface is extremely porous, apply a second coat when the first dries
- Drying times are between 2 -4 hours, depending on the temperature and humidity.
Limitations and Notes
- As mentioned above, this product is ready-to-use and doesn't require any dilution.
- Dispose of any product and packaging correctly. Do not allow it to reach watercourses.
- This product cannot restore badly disintegrated render, rubber, etc. This will require removing and subsequent re-application
- Do not apply this product below 5°C.
- Do not apply this product externally if rain is imminent or due to fall within 6 hours.
