£0.00

No products in the basket.

Bank Holiday Notice: Orders placed after 2:00 PM on Friday, August 23rd, will be shipped on Tuesday, August 27th.

£0.00

No products in the basket.

FREE Next Working Day
Delivery over £10*

Everbuild Everflex 115 G.P Building Mastic - Brown 285ml (Box of 25)

Home Shop Sealants & Adhesives Glue and Adhesives Everbuild Everflex 115 G.P Building Mastic – Brown 285ml (Box of 25)
Product SKU: MASBN25
£59.25incl VAT.
£49.38excl VAT.
In Stock

Everbuild Everflex 115 GP Building Mastic is a traditional oil-based pointing mastic intended for general pointing and sealing applications. It is suitable to adhere to most common surfaces and provides an effective waterproof seal making internal and external use suitable.

  • Suitable for painting over
  • Adheres to most common surfaces
  • Semi-dry, remaining permanently flexible beneath the surface.
  • High-solid formulation with excellent gap-filling properties
  • Excellent external weather properties.
Frequently Bought Together:
This image displays the front of the product which is a Everbuild Multi-Use Wonder Wipes Tub (100 Wipes)
-
+
£6.99 Incl VAT £5.83 Excl VAT
Bond It Sealant Applicator Tool

Only 2 left in stock

-
+
£5.99 Incl VAT £4.99 Excl VAT
This image displays the front of the product which is a Everbuild Professional Sealant Gun - C3 (280ml - 310ml)
-
+
£7.99 Incl VAT £6.66 Excl VAT
Total Price
£59.25 Incl VAT
£49.38 Excl VAT

Uses

Everflex 115 GP Building Mastic is an excellent mastic with outstanding adhesive properties enabling it to adhere to various surfaces. It works perfectly as a perimeter pointer internally and externally, with areas such as doors and windows being perfect application areas. One of the typical applications for this product is sealing composite sectional panels and low-movement vertical building joints.

Preparation

Prepare the surfaces before starting the application. Complete this by removing all dust, oil, grease and similar impurities that can hinder the adhesion. New concrete or mortar should be allowed adequate time to dry and mature.

Application

  1. Cut the tip off the cartridge without damaging the threaded screw.
  2. Screw the nozzle onto the cartridge, and cut it at a 45° angle with an opening slightly larger than the gap to be filled.
  3. Using a standard sealant gun, apply a firm, consistent pressure to extrude an even bead to optimise adhesion and visual appearance.
  4. Tool down after application using a wetted spatula, wooden spoon or applicator tool.

Limitations

  • This product is not compatible in areas that are exposed to solvents, petrol or oils
  • Give fresh concrete or mortar 28 days to reduce surface alkalinity
  • Do not use in conjunction with bitumen or asphalt
  • This product may stain marble, slate or specific sensitive natural stone.

Additional information

Weight 7.2 kg
Box Size

Box of 25

Box Buy Product Type

Sealants & Silicones

Chemical Base

Thixotropic paste (ready to use)

Density

1.6 g/cm3 approx

Movement Capability

Low

Service Temperature

-25°C to 70°C (90°C intermittent)

Joint Design

Minimum width: 5mm. Maximum width: 20mm.
Minimum depth: 10mm. Maximum depth: 20mm.
For deep joints, reduce depth by using EVERFLEX® FIX AND FILL FOAM or a
suitable joint backer rod. All joints should be designed so that the seal is
placed in a position which does not retain water or form a water trap. Triangular
fillets should be no less than 12mm across the face and should be
finished with a flat or convex face.

Compatibility

Can be used in contact with most building materials but should not be used
against bituminous compounds.

Consumption / Yield / Dosage (PRINT single line)

Approx 10 linear metres per cartridge

Ambient Air Temperature

5°C to 50°C

Curing Time

Normally 7 days, the mass below remaining plastic

Technical Data Sheet

Product Information

Weight 7.2 kg
Box Size

Box of 25

Box Buy Product Type

Sealants & Silicones

Chemical Base

Thixotropic paste (ready to use)

Density

1.6 g/cm3 approx

Movement Capability

Low

Service Temperature

-25°C to 70°C (90°C intermittent)

Joint Design

Minimum width: 5mm. Maximum width: 20mm.
Minimum depth: 10mm. Maximum depth: 20mm.
For deep joints, reduce depth by using EVERFLEX® FIX AND FILL FOAM or a
suitable joint backer rod. All joints should be designed so that the seal is
placed in a position which does not retain water or form a water trap. Triangular
fillets should be no less than 12mm across the face and should be
finished with a flat or convex face.

Compatibility

Can be used in contact with most building materials but should not be used
against bituminous compounds.

Consumption / Yield / Dosage (PRINT single line)

Approx 10 linear metres per cartridge

Ambient Air Temperature

5°C to 50°C

Curing Time

Normally 7 days, the mass below remaining plastic

Technical Data Sheet

Related Products