Cromar Cromaprufe - Black 5 Litre 
ALM Code 7 Milled Lead - 914mm x 6m 
Easy-Trim Universal Dry Verge System Black (Box of 50) 
Timloc Rad-Seal Recessed 
ALM Code 8 Milled Lead - 850mm x 3m 
Ronseal Stays White One Coat Non-Drip Paint - Gloss 2.5L 
Code 6 Cast Lead - 360mm x 6m 
Everbuild Mitre Fast Industrial Kit Superglue (Box of 24) 
Soudaseal Mirror Light Grey, 290ml 
Everbuild Firefoam B2 Gun Grade - Pink 750ml 
FloPlast Half Round Square Line Gutter Adaptor - White 
Code 8 Cast Lead - 450mm x 3m 
Timco Copper Disc Rivets 
Everbuild Quick Drying Clear Varnish - Gloss 750ml 
Ronseal Stays White One Coat Non-Drip Paint - Gloss 750ml 
Freeflow 112mm Round Gutter System 90° Gutter Angle - White 
Timloc Non-Profile Tile Vent Red (Box of 8) 
Soudal 5 Min D4 Gel PU Wood Adhesive Trade - 290ml 
Bond It Dec-Mate Flexible Filler - Magnolia EU3 
ALM Code 5 Milled Lead - 360mm x 3m 
Soudal PVCu Solvent Frame Cleaner - 1L (Box of 12) 
Cromar Vent 3 Air High Performance Breathable Membrane 1m x 50m 
Everbuild 406 Stabilising Solution - 5 Litre 
Bond It Economy Sealant Gun - Blue 900ml 
Uses
The Lead Mate by Everbuild is perfect for lead-based applications, with its exceptional compatibility with lead, general metals, and even cement. It's formulated with excellent flexibility, resistance to high and low temperatures and general weathering, making it perfect for external applications. Everbuild tested it and complied with European Standard EN15651, allowing this product to be suitable for facade interior and exterior and cold climates.
Preparation
You should prepare the surface before application; otherwise, you risk failing to achieve optimal results. Remove all contaminants on the surface that can interfere with the bonding; this includes dirt, dust, oil, grease, etc. Priming is typically not required, but in certain applications, it may be needed; if you are unsure, complete a preliminary test.
Application
- Cut the top of the cartridge, taking care not to damage the threading screw.
- Cut the nozzle at a 45° angle, with an opening to the required amount and place it into a standard applicator tool.
- Point the tip of the cartridge to the surface and squeeze the trigger, extruding the sealant.
- Smooth down the surface within 5 minutes of the application.
Read the Technical Data Sheet for full information about different applications.
Limitation and Notes
- Do not use this product in conjunction with bitumen, asphalt, neoprene and specific organic elastomers.
- This product is not suitable for application to surfaces that bleed oils, solvents, or plasticisers.
