£0.00

No products in the basket.

£0.00

No products in the basket.

FREE Next Working Day
Delivery over £10*

Everbuild Exact Gap Foam - 750ml

Home Shop Sealants & Adhesives Expanding Foam Everbuild Exact Gap Foam – 750ml
Product SKU: EVEXACT7
£13.99incl VAT.
£11.66excl VAT.
Out of Stock

The Everbuild Exact Gap Foam is a minimal expansion foam crafted specifically for applications which require precision gap filling, ensuring it’s a fine yet robust, long-lasting filler.

  • Fills and insulates gaps
  • Suitable for cutting, sawn or plastering in just two hours of application
  • Re-usable, which isn’t an option with most conventional expanding foams
  • Safe for transportation with horizontal and vertical placement suitable
Frequently Bought Together:
This image displays the front of the product which is a Everbuild Dual Purpose Foam Cleaner – 500ml
-
+
£7.99 Incl VAT £6.66 Excl VAT
This image displays the front of the product which is a Everbuild Multi-Use Wonder Wipes Tub (100 Wipes)
-
+
£6.99 Incl VAT £5.83 Excl VAT
This image displays the front of the product which is a OX Tools Waterproof Thermal Latex Gloves
OX Tools Waterproof Thermal Latex Gloves
Sizes
-
+
From: £5.99 Incl VAT £4.99 Excl VAT
Quantity Price
1 - 2 £13.99
3 - 5 £10.50
6 - 11 £9.63
12+ £9.16
Total Price
£13.99 Incl VAT
£11.66 Excl VAT

Out of stock

Get notified once the product comes in stock

Uses

The Exact Gap Foam by Everbuild is a high-quality, precise expanding foam that is formulated to deliver a long-lasting, robust filler. It's crafted specially by Everbuild technicians to prevent wasting expanding foam, which is common amongst conventional expanding foams. This product's lack of expansion compared to others is a unique feature; due to its precise filler, it can bridge gaps without wastage, which otherwise can be difficult to remove and dispose of on some sites. Other applications this product is typically applied in include;

  • Fill voids in roof tiles and draught points throughout a home
  • Filling gaps around pipe entries, window and door frames and electrical chasing before plastering
  • Filling deep joints before applying a sealant or plater
  • Repair and fill gaps and cracks in walls and floorboards
  • Insulating behind soffits, barge boards and cladding to exterior walls.

Preparation

It's vital to prepare the area before commencing the application; otherwise, you risk poor adhesive performance from the expanding foam. Clean all surfaces, removing contaminants, including dirt, dust, grease, oil, etc. Finally, you should slightly moisten the surface; this will aid the curing process of the expanding foam.

Application

  1. Shake the can thoroughly before using it (About 20 times)
  2. Screw the nozzle attached to the top of the product.
  3. ALWAYS APPLY THIS PRODUCT WHILE IT'S UPSIDE DOWN, taking care not to fill the entire cavity as the expanding foam will expand, reaching the rest.
  4. Any excess foam that may occur should be removed whilst still wet using Everbuild's Foam Cleaner; if the foam has cured, you'll have to remove it mechanically.

Limitation and Notes

  • Do not over-pressurise the container
  • This product should always be applied in ambient and surface temperatures above 5°C
  • Any spillages and tools used should be cleaned using the Everbuild Foam Cleaner.

Additional information

Product Type

Expanding Foam

Compressive Strength

3N/cm² (DIN 53421) at 10% stress

Tensile Strength

7-10N/cm² (DIN 53530)

Shear Strength

4.5N/cm² (DIN 53427)

Ambient Air Temperature

5°C – 30°C. (Optimum 20°C)

Cutting Time

Cuttable in 9-12 mins (based on 20mm bead)

Tack Free Time

4-8 minutes

Cell Structure

Medium fine

Full Load Bearing Stability

Approx. 12 hours (20mm bead)

Elongation At Tension

20-40% (DIN 53530)

Temp Res Of Cured Bead

Long Term: -40°C and +80°C
Short Term: -40°C and +100°C

Building Material Class

B3 (DIN 4102, Part 1)

Technical Data Sheet

Safety Data Sheet

Product Information

Product Type

Expanding Foam

Compressive Strength

3N/cm² (DIN 53421) at 10% stress

Tensile Strength

7-10N/cm² (DIN 53530)

Shear Strength

4.5N/cm² (DIN 53427)

Ambient Air Temperature

5°C – 30°C. (Optimum 20°C)

Cutting Time

Cuttable in 9-12 mins (based on 20mm bead)

Tack Free Time

4-8 minutes

Cell Structure

Medium fine

Full Load Bearing Stability

Approx. 12 hours (20mm bead)

Elongation At Tension

20-40% (DIN 53530)

Temp Res Of Cured Bead

Long Term: -40°C and +80°C
Short Term: -40°C and +100°C

Building Material Class

B3 (DIN 4102, Part 1)

Technical Data Sheet

Safety Data Sheet

Related Products