Everbuild FILLER COAT is a thick base coat, formulated to cover imperfect surfaces and dark colours prior to painting.
Designed for speedy roller application, Filler Coat hides and obliterates areas that have been filled Filler coat covers and preventing the re-appearance of hairline cracks and rough surfaces.
Working like a roll on filler coat, the thick formula completely covers strong colours, can be use on walls and ceilings,
The application of Filler Coat on strong colours can save several coats of emulsion.
Surfaces and Preparation:
Surface types include all mineral surface gypsum, cement plasters, lime plasters, thin layer mineral plasters, concrete and plasterboard.
Before applying, ensure surfaces are clean, sound and free from dust, Fill deep surface defects with Everbuild Fill & Skim first and smooth down.
Glossy surfaces must be sanded and then cleaned with Sugar Soap.
New Plaster and very porous or powdery surfaces should be primed first with filler coat diluted 1 part to 4 parts water and allow to dry.
Application:
- Stir Filler Coat well before use.
- Touch in corners with a brush
- Apply an even coat with a short pile roller sleeve or suitable brush
Coverage:
- 5 to 8 meters square per litre depending on surface and porosity
Drying Time:
- normally 4 to 6 hours
Limitations and must does:
This product is designed to fill minor small surface imperfections.
Ensure the filler coat has completely dried before over painting
*On very bold colours, a second coat may be required*