Code 3 Cast Lead - 300mm x 6m 
Soudal Soudafoam Gap Filler Hand Held 750ml (Box of 12) 
Everbuild Caulk Once – White 380ml 
Ronseal 6 Year Anti Mould Paint - White Silk 2.5L 
Timco Lithium EP2 Grease - 400g 
FloPlast Half Round Union Unit - White 
Permavent Easy Slate 500 - Pack of 20 
Everbuild Lumberjack 550 Floor Adhesive – 600ml 
20 Boxes x Extra Large Head Clout Nails, Galvanised 
Ronseal Exterior Yacht Varnish - Satin 2.5L 
Bond It Aluminium Foil Tape - 75mm x 45M 
Everbuild KOS Black Fire Cement - 500g 
ALM Code 5 Milled Lead - 240mm x 6m 
Everbuild Constructa-Pro Adhesive Foam - Grey 750ml 
Ulti-Mate 10K Slate Vent Adaptor 
Soudal Gap Filler Expanding Foam Genius Gun 300ml - Champagne (Box of 12) 
ALM Code 3 Milled Lead - 760mm x 3m 
Ronseal Multi Purpose Wood Filler - Natural 930g 
ALM Code 8 Milled Lead - 240mm x 6m 
Soudal Soudabond 265 Classic Spray - 500ml 
OX Pro 7 Piece Screwdriver Set 
Cromar Bitumen Trowel Mastic - Black 1L 
Timloc Over Fascia Vent - 1m 
ALM Code 6 Milled Lead Flashing - 800mm x 3m 
Everbuild Pro Fill - Light Grey 500g 
The Filler Coat by Everbuild is a high-quality, unique product used to seal over previous fillers and hairline cracks, delivering a key ideal for subsequent decorating. It's delivered in a ready-to-use tub that is applied through a simple pile-roller application. It's ideal for covering intense colours and, therefore, perfect for transforming rooms from a bright pink to a bright blue.
Preparation
Prepare the area to achieve optimal results. Start by ensuring the surface is sound, stable and free from contaminants such as dirt, dust, oil, grease, loose debris, etc. Glossy surface must be sanded and cleaned with a sugar soap before applying.
Application
- Stir the Filler Coat well before use
- Touch in corners using a brush, whilst, with open areas, you can use a pile-roller. Try not to overspread.
- Leave the surface to dry for at least 4 - 6 hours; please note it may take longer if the temperatures are cold.
Limitations and Notes
- Do not apply in temperatures below 10°C
- This should not be applied to heated surfaces
- This product will fill small imperfections on a surface, but it will not fill significant gaps.
- Very porous and powdery surfaces must be primed before painting
- New plaster must be primed and fully dry before applying the filler coat
- Do not use in contact with bitumen.
