Premium Flashpoint Lead Sealant - Sand 
Easy-Trim Ridge F Universal Dry Ridge System - 6m Kit 
OB41 Multi-Use Brake Cleaner - 400ml 
Code 3 Cast Lead - 914mm x 3m 
Everbuild P18 Gas Leak Detector - 400ml (Box of 12) 
Code 7 Cast Lead - 600mm x 6m 
Everbuild Triple Action Wood Treatment – 5 Litre 
Everbuild Opti-Mix Mortar Plasticiser - 1 Litre (Box of 12) 
ALM Code 7 Milled Lead - 390mm x 3m 
Timloc Eaves Comb Filler 1m 
Hambleside Danelaw Single Pantile Roof Tile Vent, TV10/8 - Antique Red (Box of 5) 
Premium Flashpoint Lead Sealant - Grey 
Everbuild Seal Rite Strip Out Tool 
Soudal Fix ALL Flexi – Brown 290ml (Box of 12) 
ALM Code 5 Milled Lead - 450mm x 6m 
Everbuild General Purpose Silicone - Clear 280ml (Box of 12) 
OX Pro Semi Round Dutch Pin, Swivel Arm - 4 Pack 
Soudal Gun & Foam Cleaner Gun Grade - 500ml 
Code 4 Cast Lead - 800mm x 3m 
Code 5 Cast Lead - 760mm x 3m 
Soudal Cartridge Gun Heavy Duty - Black 310ml 
Bond It Patination Oil 1L 
Klober Double Pantile Vent - Antique Red KG9858-3-0116 (Box of 10) 
ALM Code 3 Milled Lead - 390mm x 3m 
Code 8 Cast Lead - 240mm x 3m 
Siroflex Trade Superglue Activator Spray - 400ml 
Bond It The Beast PU Adhesive - Brown 150ml 
Siroflex Trade Clearbond Adhesive Internal Use - Clear 290ml 
Uses
The Forever Range by Everbuild is a high-quality mould shield product that can achieve up to 10 years of life without any signs of organic growth, including mould, mildew, or bacteria. It's perfect for application areas that suffer from high humidity levels, achieved by its ability to resist water and organic growth. Overall, it's a highly flexible bond that won't suffer from deteriorating for decades to come. Application this product is typically applied in include;
- Sealing baths, showers, wetrooms, sanitary ware, kitchens, ceramic tiles and all application areas of high humidity or areas that demand hygiene protection
- Sealing around window and door frames internally, which are subject to high levels of condensation
Preparation
Before commencing the application, preparing the substrates is vital to ensure you achieve optimal results. Clean the surface by removing contaminants that can interfere with the adhesion, including dirt, oil, grease, dust, etc. Deep gaps should have an expanding foam applied to prevent wasting the sealant. If you're using this product for plastic or acrylic baths, fill it half full with water during the sealing and curing process; this will allow it to accommodate being full and empty.
Application
- Start by cutting the top of the cartridge, taking care not to damage the threaded screw.
- Cut the nozzle at a 45° angle, with an opening slightly larger than the gap to be filled.
- Point the tip of the nozzle to one end of the gap and apply one singular bead along the whole surface. (Note: you can use masking tape to help prevent you from making a mess)
- After applying the sealant, tool it down within 15 minutes before the skin starts to form.
Limitations and Notes
- This product is not suitable for application on surfaces that bleed oils or plasticisers
- Do not apply this on substrates or areas that are bitumen/pitched-based
