£0.00

No products in the basket.

£0.00

No products in the basket.

FREE Next Working Day
Delivery over £10*

Everbuild Gun Grade Expanding Foam – 750 ml

Home Shop Caulk & Fillers Gap Fillers Everbuild Gun Grade Expanding Foam – 750 ml
Product SKU: EVGF7
£8.99incl VAT.
£7.49excl VAT.
In Stock

Everbuild Gun Grade Expanding Foam delivers a quick-setting, polyurethane-based foam which expands greatly on application, yielding up to 50 times the can contents.

  • Delivers insulating and acoustic properties
  • Quick-setting formula, suitable for cutting, sawn or plastering in just 1 hour
  • Economical product, with it yielding up to 50 times its original volume
  • Fills irregular, difficult-to-reach gaps that most conventional fillers would fail
Frequently Bought Together:
This image displays the front of the product which is a Everbuild Multi-Use Wonder Wipes Tub (100 Wipes)
-
+
£6.99 Incl VAT £5.83 Excl VAT
This image displays the front of the product which is a Soudal Trade Foam & Gun Cleaner - 500ml
-
+
£3.99 Incl VAT £3.33 Excl VAT
This image shows the Bond It Professional Foam Gun Applicator with itself and the packaging alongside it.
-
+
£12.99 Incl VAT £10.83 Excl VAT
Quantity Price
1 - 2 £8.99
3 - 5 £6.66
6 - 11 £6.16
12+ £5.83
Total Price
£8.99 Incl VAT
£7.49 Excl VAT

Uses

The Gun Grade Expanding Foam by Everbuild is perfect for filling irregular, large holes that most conventional fillers cannot achieve. Due to its excellent composite, a 750ml can yield up to 50 times its original volume, offering excellent value for money. Another feature of the expanding foam is its ability to be cut, sawn or plastered in just 1 hour after application, allowing those to complete the job quicker. Finally, it offers fantastic insulating and acoustic properties, with it restricting the travel of sound. Applications the Expanding Foam is typically used include;

  • Gaps around window and door frames
  • Holes around pipe entries through walls
  • Electric wire chasing prior to plastering
  • Fill the joint before applying sealant or plaster.
  • Irregular cracks in stone, brick, concrete or plaster
  • Fixing door frames and timber structures
  • Repairing window sills, frames and thresholds
  • Insulating behind cladding to exterior
  • Insulating behind soffits and barge boards

Preparation

You should clean the surface, focusing on removing any contaminants on the surface that can hinder adhesion; this includes dirt, dust, oil, grease, etc. After cleaning the surface, allow it to dry and then moisten it with water; this is to optimise the curing process.

Application

Please equip a pair of protective gloves before handling this product. If you're applying this product to fix a door frame, support must be used to support the curing process of the foam.

  1. Shake the can thoroughly before using it (about 20 times)
  2. Carefully fix the nozzle; do not tie it too tight or force it.
  3. Ensure the can is upside down on top of the gun, and point the tip of the gun at the application area.
  4. Partially fill the gap; the foam will expand, filling the remaining void.
  5. Any excess foam can be removed whilst still wet with a dedicated foam cleaner, and if it's cured, you'll need to remove it mechanically.

Limitations

  • Do not over-pressurise the container, as it may explode.
  • Always apply this product with an ambient temperature above 5°C
  • Any spills should be cleaned using a dedicated foam cleaner; otherwise, you must remove the expanding foam mechanically.
  • After using the product, you should clean the gun thoroughly using a gun foam cleaner.

Additional information

Compressive Strength

5 N/cm² (DIN 53421) at 10 % stress

Tensile Strength

18 N/cm² (DIN 53455)

Elongation at Break

Elongation At Tension – 30 % (DIN 53455)

Shear Strength

8 N/cm² (DIN 53422)

Dimensional Stability

Full Load Bearing Stability – App, 12 hours (20 mm bead)

Thermal Resistance

Thermal Conductivity – 0.04 W/Mk (DIN 52612)

Water Absorption

0.3 Vol % (DIN 53428)

Ambient Air Temperature

5°C – 25°C. (Optimum 20 °C)

Cutting Time

20 mins to 1 hour depending on bead dimensions

Tack Free Time

Approx. 8 minutes

Expansion

45 litres (750 ml can)

Cell Structure

Medium fine

Temp Res Of Cured Bead

Long Term: -40°C to +80°C
Short Term: -40°C to +100°C

Brand

Everbuild

Everbuild is the UK's leading sealant, adhesive and building chemicals brand that has a trusted name amongst the trade and DIY enthusiasts. From simple house fixes to more complex projects, Everbuild's range will be there for your needs.

Range of Everbuild Products

Everbuild have a phenomenal range of products, and we at ERoofing are proud to stock them. We have the popular 905 all-weather coatings, a full-bodied black brushable bitumen compound with added fibres for reinforcement among the vast range. Further, we have 901 Black Bitumen Paint to the 908 DPM, an odourless rubber enriched bitumen emulsion. Moreover, we stock a range of quality sealants for any DIY house project, including Everflex, Bath & Kitchen sealant, and external frame sealant.

Free Delivery on Everbuild Products

If you spend more than £10 on your order, you'll automatically qualify for free shipping on Everbuild products. This offer includes sealants, paints, glue adhesives, and others.

Technical Data Sheet

Safety Data Sheet

Product Information

Compressive Strength

5 N/cm² (DIN 53421) at 10 % stress

Tensile Strength

18 N/cm² (DIN 53455)

Elongation at Break

Elongation At Tension – 30 % (DIN 53455)

Shear Strength

8 N/cm² (DIN 53422)

Dimensional Stability

Full Load Bearing Stability – App, 12 hours (20 mm bead)

Thermal Resistance

Thermal Conductivity – 0.04 W/Mk (DIN 52612)

Water Absorption

0.3 Vol % (DIN 53428)

Ambient Air Temperature

5°C – 25°C. (Optimum 20 °C)

Cutting Time

20 mins to 1 hour depending on bead dimensions

Tack Free Time

Approx. 8 minutes

Expansion

45 litres (750 ml can)

Cell Structure

Medium fine

Temp Res Of Cured Bead

Long Term: -40°C to +80°C
Short Term: -40°C to +100°C

Technical Data Sheet

Safety Data Sheet

Related Products