Soudal Brake Cleaner - 400ml 
Freeflow 65mm Square Down Pipe Clip Standard - White 
Double Nylon Tool Pouch with Belt 
Klober Regent Tile Vent KG6084, Grey 
Ronseal Exterior Yacht Varnish - Satin 500ml 
BORA Centipede 2ft x 4ft x 30in Unit - 4 X-Cups + 2 Clamp + C/S Bag 
Ronseal Stays White 2in1 Paint & Primer - Matt 750ml 
Ronseal One Coat Stain Block - White 2.5L 
Soudal Construction Silicone, Grey - 290ml 
Everbuild Black Jack 905 All Weather Roof Coating – 5 Litre 
Ox Tools OX Pro Heavy Duty Sealant Gun - 290ml to 400ml 
Bond It Rubber Bitumen Emulsion - Black 2.5L 
ALM Code 5 Milled Lead - 300mm x 3m 
OX Pro Magnetic Level 600mm 
EVO-STIK Stick Like Sh*t - White 290ml 
ALM Code 7 Milled Lead - 1600mm x 3m 
Soudal Superglue Activator - 200ml 
OX Pro Jab Saw - 6.5" / 165mm & Holster Pack 
Everbuild Everflex Premium+ 500 Bath & Sanitary Silicone - Clear 295ml (Box of 25) 
Gorilla Tape - Black (48mm x 32m) 
Timco 25 Spanner Set 
Timloc 1206 Underfloor Vent Horizontal Rear Extension + 100mm 
Everbuild Stixall Extreme Power – Clear 290ml 
Everbuild Lumberjack 30 Minute PU Wood Adhesive Gel - 310ml (Box of 12) 
Bond It Aluminium Foil Tape - 100mm x 45M (Box of 12) 
Everbuild Aquaseal Liquid Roof – Slate Grey 7kg 
OX Pro Dry Wall Hammer - 14 oz 
Hambleside Danelaw Felt Lap Vent 
Everbuild Flue Jointing Compound - 1kg 
Code 5 Cast Lead - 1000mm x 3m 
Everbuild Forever Ivory Silicone Sealant – 295ml 
Uses
The JETCEM Rapid by Everbuild is the ultimate quick repair product for concrete-based surfaces. Everbuild's technicians have formulated the JETCEM with a superb, fast-setting product, enabling swift application and easy repair. Applications where the JETCEM is perfect include;
- Internal and external repairs to gaps and cracks on floors and walls
- Repairing flagstones, slabs, stones and bricks
- Patching window sills and steps
- Jointing earthenware drains and pipes
- Repairing ponds and pools
- Setting in W/C's and sinks
- Leak sealing in concrete-based surfaces
- Setting posts and railing
Preparation
Before commencing the application, it's essential to prepare the surface. Complete this by removing any contaminants on the surface that can hinder the adhesion, including dirt, dust, oil, grease, etc.
Application
- Using a clean vessel, mix 3 parts volume powder to 1 part cold, clean water. You should only mix enough for up to 10 minutes of work, as after 10 minutes, the mixture becomes invalid for use. To know you've mixed it correctly, you should finish with a reasonably thick slump-free paste.
- Saturate the surface entirely using water.
- Using a trowel or filling knife, scoop the mixture into the application area.
- In warm conditions, you can cover the JETCEM with polyethene to assist in the curing process.
Limitations
- When mixing, it's important to mix only enough for up to 10 minutes. After 10 minutes, it will stiffen and become invalid; you cannot add water to it to try and soften it; this will weaken the cement.
- This product should not be used for load-bearing applications.
- Do not use this for holes deeper than 25mm.
- Do not apply where chemical resistance is required.
