Hambleside Danelaw (HD PCSPA) Tile Vent Adaptor and Flexi for TV10 Range 
Sika 1 Waterproofer – 5 Litre 
Everbuild 503 SBR Bond – 2.5 Litre 
Colron Refined Finishing Wax - 325g 
Ronseal Exterior Yacht Varnish - Gloss 1L 
Timloc Non-Profile Tile Vent Black (Box of 8) 
Code 3 Cast Lead - 150mm x 6m 
Bond It Barrier Tape Yellow and Black - 70mm x 500M 
Evo-Stik 528 Instant Contact Adhesive – 5 Litre 
Bond It Power Proof Concentrated Waterproof Render Admixture - 1 Litre 
OX Pro Heavy Duty Aviation Snips Right Cut (Green) 
OX Trade Torpedo Level 230mm / 9in 
10 x Permavent Black Breather Membrane – 1m x 50m 
Everflex Contract AC50 Acoustic Sealant & Adhesive - White 900ml (Box of 12) 
ALM Code 8 Milled Lead - 240mm x 6m 
Code 4 Cast Lead - 914mm x 6m 
Bond It Monster Scrim Drywall Tape - White 100mm x 90m 
FloPlast Half Round Gutter Union, Brown 
Ronseal 5 Minute Multi-Purpose Smooth Finish Filler - 290ml 
Everbuild Lumberjack 550 Floor Adhesive – 600ml 
Uses
KOS Fire Cement by Everbuild is an excellent product that resists high temperatures. It comes in a ready-mixed blend of thermo-setting resins and temperature-resistant inorganic fillers that cures when exposed to heat to give a seal that is resistant to heat.
Preparation
The surfaces must be prepared, remove any dust, oil, grease or other contaminants present, and wet all surfaces to give a good key.
Application
- Use the product straight from the tub; soften it with water slightly if needed.
- Use a trowel and apply well into the area, filling and covering the surface.
- After the first application, increase the heat of the cement gradually over 4 hours. A crack may start to form; if so, re-apply the cement to the area, this will create a smoke-tight seal.
Limitations
- This product is not suitable as a gas sealant
- Always moisten the surface before applying
- Always apply heat gradually
- The Black will turn into a buff/grey colour above 650°C
- Not suitable for use where the product is exposed to water
