Ronseal Stays White One Coat Non-Drip Paint - Satin 2.5L 
Roughneck® Gorilla Pro-Grip Utility Bar - 376mm/15inch 
Ronseal Stays White 2in1 Paint & Primer - Satin 750ml 
D4 Wood Adhesive – 1 Litre 
Hambleside Danelaw Felt Lap Vent 
Freeflow 68mm Round Down Pipe Shoe - White 
Everbuild Everflex 200 Contractors LMA Silicone - Brown 295ml 
Code 8 Cast Lead - 800mm x 6m 
Thompson's One Coat Damp Seal - White 2.5L 
Bond It Bath Mate Bath & Kitchen Sealant - White EU3 Box of 25 
Everbuild Anchorset Green 300 - Grey 300ml (Box of 12) 
Everbuild Evercryl One Coat Grey – 20kg 
Ronseal Ultra Tough Satincoat Clear Varnish - 5L 
ALM Code 8 Milled Lead - 150mm x 6m 
FloPlast Half Round Internal Stop End, White – 112mm 
Sika Stone Protector - Clear 5 Litre 
Bond It Dec-Mate Flexible Filler - Magnolia EU3 
OX Trade Medium Red Carpenters Pencils - Pack of 10 
Armatool Mop Heads Size 12 
Uses
KOS Fire Cement by Everbuild is an excellent product that resists high temperatures. It comes in a ready-mixed blend of thermo-setting resins and temperature-resistant inorganic fillers that cures when exposed to heat to give a seal that is resistant to heat.
Preparation
The surfaces must be prepared, remove any dust, oil, grease or other contaminants present, and wet all surfaces to give a good key.
Application
- Use the product straight from the tub; soften it with water slightly if needed.
- Use a trowel and apply well into the area, filling and covering the surface.
- After the first application, increase the heat of the cement gradually over 4 hours. A crack may start to form; if so, re-apply the cement to the area, this will create a smoke-tight seal.
Limitations
- This product is not suitable as a gas sealant
- Always moisten the surface before applying
- Always apply heat gradually
- The Black will turn into a buff/grey colour above 650°C
- Not suitable for use where the product is exposed to water
