Bath-Mate Bath and Kitchen Sealant by Bond It is a high-quality, permanently flexible, water-based sealant with excellent adhesion to plastic, ceramic tiles, porcelain and wood.
Applied using a standard sealant gun, this Bond It Bath and Kitchen Sealant can be applied to seal ceramic baths, sinks and worktops, forming a watertight bond to the surface. Ensure all the surfaces are clean, sound, dry and free from dust, oil or other contaminants that may affect adhesion.
Note that this product is not a silicone sealant. Therefore it's not recommended if; it is to be applied externally during rainy weather, if the temperature where applying is below +5°C, the joints attached are immersed in water, used in contact with bituminous products, used in areas of high abrasion, also with plastic baths, we recommend using a sealant with greater flexibility to secure a plastic bathtub.
Additional information
Fast Cure
Tools within 5 minutes
Skinning Time @ 20°C and 50%RH
Skins after 20 minutes
Full Cure
24 hours, dependant on bead thickness and temperature
Waiting Time Before Painting
1 hour for emulsion paints
24 hours for solvent based paints
Sag
None
Movement Accommodation
7.5%
Water Resistance
Good
Brand
Bond It
For almost two decades, Bond It has been a manufacturer of high performance, high-quality building chemicals such as sealants, adhesives, grouts, cleaners, expanding foams, fillers, decorating sundries, landscaping products and other similar products.
Buying Bond It Products from ERoofing
At ERoofing, we provide a vast range of products from some top suppliers, including Bond It. In addition, we offer products such as Bitumen and Flashing Primer made for priming surfaces before applying bituminous materials and flashing tape.
Free Delivery on Bond It Products
We also offer free next-day delivery with Bond It products if your cart is over £10. This service is currently available for England, Wales and selected parts of Scotland.
Technical Data Sheet
Product Information
Fast Cure
Tools within 5 minutes
Skinning Time @ 20°C and 50%RH
Skins after 20 minutes
Full Cure
24 hours, dependant on bead thickness and temperature
Waiting Time Before Painting
1 hour for emulsion paints
24 hours for solvent based paints