Everbuild KOS Fire Cement Buff – 2kg 
ALM Code 8 Milled Lead - 180mm x 3m 
Timco Straight Tower Bolt Black 6" Gate Bolt 
Ronseal One Coat Stays White Radiator Paint - Matt 750ml 
Bond It Frame-Mate Door & Window Sealant - White EU3 
Bond It Rain-Mate All Weather Sealant - White EU3 
Code 7 Cast Lead - 1600mm x 6m 
OX Pro Top Steady Nail-On (Veneer) Clamp Set 
Timloc 1206 Underfloor Vent Horizontal Rear Extension + 100mm 
Armatool Leather Belt Black, Large 
Everbuild B1 Hand Held Expanding Fire Rated Foam - Pink 750ml (Box of 12) 
Timco Heavy-Duty Tarpaulin - 2m x 3m 
Bond It Bitumen Paint - Black 1L 
Timloc 1203 Underfloor Vent Horizontal Front Extension + 115mm 
OX Pro Heavy Duty Aviation Snips Left Cut (Red) 
Bond It All Weather Roofing Compound - Black 5L 
ALM Code 7 Milled Lead - 300mm x 6m 
Cromar ProRidge Universal Ridge System 3m Kit 
42 x ERidge Dry Fix Ridge System Black – 6m Kit 
Everbuild Stixall Extreme Power – Brown 290ml 
Everbuild Pro Blue Masking Tape - 25mm x 33mm 
Lead Sheet Restorer - G1 
Klober Profile-Line Twin Plain Tile Vent - Brown KG9861-0247 (Box of 10) 
Everbuild Everflex Lead Mate Sealant Grey - 295 ml 
Uses
The Lumberjack 30 Min PU Wood Adhesive by Everbuild offers outstanding bonding to common building surfaces and wood. Everbuild's technicians formulated this product to deliver a 30-minute curing time, allowing faster application, perfect for line manufacturing. Other manufacturing areas this is perfect for include manufacturing doors and windows, furniture and the construction of staircases and ladders.
Preparation
You should prepare the surface before starting the application, removing any contaminants on the surface, such as dirt, dust, oil, grease, etc. You need at least one surface to be porous; non-porous surfaces should be abraded to provide a key for the adhesive. You can further enhance the adhesion by slightly moistening one surface with a damp cloth; do not over-wet.
Application
- Cut the top of the cartridge, taking care not to damage the threaded screw.
- Cut the nozzle at a 45° angle and fit it into a standard sealant gun/applicator.
- Using a firm pressure on the handle, apply the adhesive to one surface, and after applying it, bring the two surfaces together immediately.
Limitations
- One surface must be porous for successful bonding
- Not suitable for polyethylene, polypropylene, Teflon or Nylon.
- Surfaces must be damp, but the moisture content of wood must not exceed 30% w/w
- Only apply this product between the temperature of 5°C to 30°C
- Setting times will be increased at low temperatures and low humidity.
