Klober 15x9 Tile Vent - Slate Grey KG9690-0429 (Box of 10) 
ALM Code 6 Milled Lead Flashing- 1000mm x 6m 
Ronseal Quick Drying Smooth Finish Filler - 330g 
Timco 30mm Cladding Pin - 250 Pieces 
Cromar Bitumen Primer – Black 5 Litre 
Samac Hall Hooks - (Bags of 10) 
Everbuild Easi-Squeeze Flexible Decorators Filler - White 200ml 
Everbuild Tecnic Silicone 825 – Limestone White 380ml (Box of 25) 
Ronseal uPVC Paint - White Satin 2.5L 
OX Trade Claw Hammer - 20 oz 
Soudal Fix ALL Turbo - Grey 290ml 
Timco FirmaHold Collated Brad A2 Stainless Steel Nails - 16G x 50mm (2000 Pieces) 
OX Tools OXIT Sealant & Adhesive - White 290ml (Box of 12) 
Timco Straight Tower Bolt Black 6" Gate Bolt 
Ox Pro Ultraflex Finishing Trowel - 16" (405mm x 110mm) 
Timloc Non-Profile Tile Vent Black (Box of 8) 
Armatool Slate Rip - Stainless Steel 
Ronseal One Coat Stays White Radiator Paint - Satin 250ml 
Bond It Indian Stone Sealer - Clear 5L 
ALM Code 8 Milled Lead - 300mm x 3m 
Everbuild Febond PVA - 5L 
Soudal Trade Gun Grade Expanding Foam - 750ml (Box of 12) 
FloPlast Square Line Shoe Black – 65mm 
Timco Velocity Premium Multi-Use Screws - Mixed Tray 
Soudal Genius Gun Soudafoam Window and Door - 600ml (Box of 12) 
Uses
The Lumberjack 30 Min PU Wood Adhesive by Everbuild offers outstanding bonding to common building surfaces and wood. Everbuild's technicians formulated this product to deliver a 30-minute curing time, allowing faster application, perfect for line manufacturing. Other manufacturing areas this is perfect for include manufacturing doors and windows, furniture and the construction of staircases and ladders.
Preparation
You should prepare the surface before starting the application, removing any contaminants on the surface, such as dirt, dust, oil, grease, etc. You need at least one surface to be porous; non-porous surfaces should be abraded to provide a key for the adhesive. You can further enhance the adhesion by slightly moistening one surface with a damp cloth; do not over-wet.
Application
- Cut the top of the cartridge, taking care not to damage the threaded screw.
- Cut the nozzle at a 45° angle and fit it into a standard sealant gun/applicator.
- Using a firm pressure on the handle, apply the adhesive to one surface, and after applying it, bring the two surfaces together immediately.
Limitations
- One surface must be porous for successful bonding
- Not suitable for polyethylene, polypropylene, Teflon or Nylon.
- Surfaces must be damp, but the moisture content of wood must not exceed 30% w/w
- Only apply this product between the temperature of 5°C to 30°C
- Setting times will be increased at low temperatures and low humidity.
