Timco Aluminium Hawk 
ALM Code 4 Milled Lead - 760mm x 3m 
Everbuild 709 FebFlor Floor-Flex Plus - 5 Litre 
Gorilla Contact Adhesive Tube - Clear 75g 
Bond It PVA & Adhesive Sealer White 500ml - Box of 20 
Bond It All Weather Roofing Compound - Black 25L 
84 x ERidge Dry Fix Ridge System Black – 6m Kit 
Soudal Insulating Foam Genius Gun 750ml - Champagne (Box of 12) 
Sika Mould Buster – 5 Litre 
Ronseal Expanding Foam Filler - 500ml 
OX Pro Pool Trowel, Rigid 450MM / 18" 
SikaBond Waterproof PVA – 5 Litre 
Everbuild Mammoth Barrier Tape - Red/White (72mm x 500m) 
Soudal Mitre Bonding Kit Superglue Adhesive & Activator 
Timco Timber Frame Screw - Wafer Green (6.7 x 60) Box of 50 
Freeflow 112mm Round Union Gutter Bracket - White 
ALM Code 7 Milled Lead - 210mm x 3m 
FloPlast Half Round Gutter Union, Brown 
Everbuild 501 PVA - 1 Litre 
Everbuild Showerproof Bathroom Silicone - Clear 280ml 
Timco Hazard Tape 
Hambleside Danelaw TV15/7 Tile Vent - Antique Red (Box of 5) 
Everbuild 701 Non-Slip Tile Adhesive – White 7.5kg 
Uses
The Lumberjack 5 Min PU Wood Adhesive by Everbuild offers outstanding bonding to common building surfaces and wood. Everbuild's technicians formulated this product to deliver a 5-minute curing time, allowing faster application, perfect for line manufacturing. Other manufacturing areas this is perfect for include manufacturing doors and windows, furniture and the construction of staircases and ladders.
Preparation
You should prepare the surface before starting the application, removing any contaminants on the surface, such as dirt, dust, oil, grease, etc. You need at least one surface to be porous; non-porous surfaces should be abraded to provide a key for the adhesive. You can further enhance the adhesion by slightly moistening one surface with a damp cloth; do not over-wet.
Application
- Cut the top of the cartridge, taking care not to damage the threaded screw.
- Cut the nozzle at a 45° angle and fit it into a standard sealant gun/applicator.
- Using a firm pressure on the handle, apply the adhesive to one surface, and after applying it, bring the two surfaces together immediately.
Limitations
- One surface must be porous for successful bonding
- Not suitable for polyethylene, polypropylene, Teflon or Nylon.
- Surfaces must be damp, but the moisture content of wood must not exceed 30% w/w
- Only apply this product between the temperature of 5°C to 30°C
- Setting times will be increased at low temperatures and low humidity.
