Easy-Trim End Cap Half Round - Black (Box of 10) 
ALM Code 8 Milled Lead - 300mm x 6m 
Spax Magnetic Bit Holder - 1 Piece 
Bond It Glass Cleaner - Clear 1L 
OX Pro Top Steady Nail-On (Full Kit) Clamp Set 
FloPlast Half Round Stop End Outlet, Brown – 112mm 
Bostik Builder Tape, 50mm - 25m 
Everbuild 204 Evermix 3 in 1 - 5 Litre 
Everbuild 506 Universal Contractors PVA - 5Kg White 
OX Trade Torpedo Level 230mm / 9in 
Code 7 Cast Lead - 360mm x 3m 
Everbuild Forever Ivory Silicone Sealant – 295ml 
OX Tools Pro Chalk Line Reel 30m / 100ft 
Bond It Wood Pro High Strength Flexible Hybrid Adhesive - EU3 Buff 
OX Trade Plastic Speed Rafters Square Set 
Bond It Mirror Pro Adhesive - White EU3 
Klober Profile-Line Limarech Tile Vent - Antique Red KG9859-3-0116 (Box of 10) 
Bond It B3 Fill And Fix Expanding Foam Gun Grade - Beige 750ml 
Code 6 Cast Lead - 760mm x 6m 
Timco 65 x 3.75 Galvanised Clout Nails - 1kg 
Cromar Cromaprufe - Black 5 Litre 
Ronseal Stays White One Coat Non-Drip Paint - Gloss 750ml 
Everbuild Silicone Spray - 400ml (Box of 12) 
Uses
The Lumberjack 5 Min PU Wood Adhesive by Everbuild offers outstanding bonding to common building surfaces and wood. Everbuild's technicians formulated this product to deliver a 5-minute curing time, allowing faster application, perfect for line manufacturing. Other manufacturing areas this is perfect for include manufacturing doors and windows, furniture and the construction of staircases and ladders.
Preparation
You should prepare the surface before starting the application, removing any contaminants on the surface, such as dirt, dust, oil, grease, etc. You need at least one surface to be porous; non-porous surfaces should be abraded to provide a key for the adhesive. You can further enhance the adhesion by slightly moistening one surface with a damp cloth; do not over-wet.
Application
- Cut the top of the cartridge, taking care not to damage the threaded screw.
- Cut the nozzle at a 45° angle and fit it into a standard sealant gun/applicator.
- Using a firm pressure on the handle, apply the adhesive to one surface, and after applying it, bring the two surfaces together immediately.
Limitations
- One surface must be porous for successful bonding
- Not suitable for polyethylene, polypropylene, Teflon or Nylon.
- Surfaces must be damp, but the moisture content of wood must not exceed 30% w/w
- Only apply this product between the temperature of 5°C to 30°C
- Setting times will be increased at low temperatures and low humidity.
