Easy-Trim Over Fascia Vent - 25mm x 500mm (Box of 50) 
OX Pro Tuff Rule - Cyan 
Thompson's Patio & Block Paving Seal - Wet Look 5L 
ALM Code 4 Milled Lead - 390mm x 3m 
Soudal B2 Fire Rated Expanding Foam Gun Grade - 750ml 
Everbuild 502 Wood Adhesive – 5 Litre 
Code 7 Cast Lead - 1000mm x 6m 
Timco Hazard Tape 
Thompson's One Coat Waterseal - 2.5L 
Everbuild Black Jack 908 DPM – 25 Litre 
ALM Code 5 Milled Lead - 1600mm x 3m 
FloPlast Rafter Bracket Top Fix 
Everbuild Everflex AquaMate Aquarium Sealant – Translucent 295ml 
BORA - PM-4500 Speedhorse 
Everbuild General Purpose Silicone - White 280ml (Box of 12) 
Patination Oil Lead Mate Flashing Protection Coating - 500ML 
Ronseal Trade 10Yr Woodstain Satin Walnut 750ml Brown 
Everbuild Seal Rite Strip Out Tool 
Timloc Plain Tile Vent Red (Box of 14) 
Armatool Slate Rip - Stainless Steel 
FloPlast Half Round Fascia Bracket, Brown – 112mm 
Easy-Trim Universal Dry Verge System Black (Box of 50) 
Soudal Trade Gun Grade Expanding Foam - 750ml (Box of 12) 
ALM Code 7 Milled Lead - 800mm x 6m 
OX Tools Winter Set - Beanie, Socks, Thermal Gloves 
Soudal Lead Sheet Sealant 290ml - Grey (Box of 12) 
Easy-Trim Lead R Flashing Smooth – 600mm x 5m 
ALM Code 3 Milled Lead - 390mm x 6m 
Cromar Vent 3 Light Breathable Membrane - 1m x 50m (Full Pallet of 56) 
ALM Code 8 Milled Lead - 450mm x 3m 
Uses
The Lumberjack 5 Min PU Wood Adhesive by Everbuild offers outstanding bonding to common building surfaces and wood. Everbuild's technicians formulated this product to deliver a 5-minute curing time, allowing faster application, perfect for line manufacturing. Other manufacturing areas this is perfect for include manufacturing doors and windows, furniture and the construction of staircases and ladders.
Preparation
You should prepare the surface before starting the application, removing any contaminants on the surface, such as dirt, dust, oil, grease, etc. You need at least one surface to be porous; non-porous surfaces should be abraded to provide a key for the adhesive. You can further enhance the adhesion by slightly moistening one surface with a damp cloth; do not over-wet.
Application
- Cut the top of the cartridge, taking care not to damage the threaded screw.
- Cut the nozzle at a 45° angle and fit it into a standard sealant gun/applicator.
- Using a firm pressure on the handle, apply the adhesive to one surface, and after applying it, bring the two surfaces together immediately.
Limitations
- One surface must be porous for successful bonding
- Not suitable for polyethylene, polypropylene, Teflon or Nylon.
- Surfaces must be damp, but the moisture content of wood must not exceed 30% w/w
- Only apply this product between the temperature of 5°C to 30°C
- Setting times will be increased at low temperatures and low humidity.
