Uses
The 502 All Purpose Weatherproof Wood Adhesive By Everbuild is the perfect wood adhesive for all woodworking, joinery, furniture assembly and general household DIY applications. It's formulated with a water-based composite, making it an environmentally friendly product, delivered with a transparent, fast cure. A unique feature of this product is its suitability for curing through radio frequencies.
Preparation
Before commencing the application, check the wood to ensure it's in good health. Any signs of wet or dry rot must be removed and replaced or treated, and you can use the Ronseal Wet Rot Hardener if you would like to treat it before replacing it.
Application
- Apply a thin layer of adhesive to both surfaces and over-applying the glue will slow curing times
- Clamb surfaces together until the adhesive is dry, which can take up to 8 hours.
- When fitting dowels, the adhesive should be applied to the holes.
Limitation and Notes
- This product is not suitable for application in constant water immersion.
- Ensure wood doesn't contain excessive moisture (<15)
- Do not use at temperatures below 10°C
- Clean any excess adhesive by using a damp cloth during the clamping process before the glue has cured.
- Before staining or sanding, sand any excess glue off the wood.
- Ensure sufficient clamping pressure during curing, which is especially important with radio frequency bonding.
- It can be used with laminate strips, but it is not suitable for large areas of laminate.
- If applying this product externally, it's essential to protect all glue joints with an impervious paint system.