£0.00

No products in the basket.

£0.00

No products in the basket.

FREE Next Working Day
Delivery over £10*

Everbuild Plumbers PVC Pipe Cement - Clear 250ml (Box of 12)

Home Shop Sealants & Adhesives Everbuild Plumbers PVC Pipe Cement – Clear 250ml (Box of 12)
Product SKU: P16PIPE12
£55.92incl VAT.
£46.60excl VAT.
In Stock

Everbuild P16 PVC Pipe Cement is a non-drip, thixotropic solvent-based pipe cement, perfect for non-pressure PVC and ABS thermoplastic pipes and conduits.

  • Non-drip gel formula
  • Easy-to-apply, thixotropic paste
  • Rapid bonding times, with outstanding strength development
Frequently Bought Together:
This image displays the front of the product which is a Everbuild Multi-Use Wonder Wipes Tub (100 Wipes)
-
+
£6.99 Incl VAT £5.83 Excl VAT
Soudal Adhesive Remover - 400ml
-
+
£9.99 Incl VAT £8.33 Excl VAT
-
+
£7.29 Incl VAT £6.08 Excl VAT
Total Price
£55.92 Incl VAT
£46.60 Excl VAT

The P16 PVC Pipe Cement offers the ultimate product for plumbers or D.I.Yers who are looking to seal various types of plumbing pipes. Everbuild technicians formulated this product to deliver unique features, including a long open time with a rapid rate of bond strength development. This feature allows you time to apply the product and set it up correctly, and once in place, it will rapidly start to cure.

Preparation

It's essential to cover your skin and clothing with appropriate protective clothing. You ventilate the room the application is in, preventing unwanted inhaling, and any possibility of ignition should be removed. All surfaces must be clean, sound and dry. Finally, cut pipes squarely, removing any swarf and chamfer the outside edge. Lightly abrading pipes with emery cloth and using a proprietary solvent and clean to prime the surface.

Application

  1. Apply a thin, even coat onto both surfaces using a brush.
  2. Slide the two surfaces together immediately, but do not twist them.
  3. Hold in place for 20-30 seconds, removing any excess adhesive with a cloth.
  4. You should allow at least 10 minutes of drying time before handing. If the pipe is non-pressure, install it back into service after 8 hours. If the pipe is pressurised, you must wait at least 24 hours.
  5. After completing the application, you should reseal the bottle straight away.

Limitations

  • This is unsuitable for application with potable water.
  • Always apply to both surfaces when applying.
  • You should not dip the pipes into the adhesive, and don't contaminate the adhesive with other solutions.
  • After finishing the application, you should seal the container straightaway.
  • Do not apply this product below 5°C.
  • Allow at least 10 minutes before handling and wait 8 hours for non-pressured and 24 hours for pressured pipes before putting them back into service.

Additional information

Weight 3.6 kg
Colour

Clear

Storage Conditions

Store in original unopened containers in a cool (+5°C to +35°C) dry area out of direct sunlight. Protect from frost.

Density

0.87 g/cm³ at 20 °C

Yield

Approx. 0.6m² per 250ml when applied as directed i.e. enough for 31 x 32mm diameter joints or 6 x 90mm joints.

Conforms to

CE mark BSEN 14814 and Kite mark BSEN 14680

Technical Data Sheet

Safety Data Sheet

Product Information

Weight 3.6 kg
Colour

Clear

Storage Conditions

Store in original unopened containers in a cool (+5°C to +35°C) dry area out of direct sunlight. Protect from frost.

Density

0.87 g/cm³ at 20 °C

Yield

Approx. 0.6m² per 250ml when applied as directed i.e. enough for 31 x 32mm diameter joints or 6 x 90mm joints.

Conforms to

CE mark BSEN 14814 and Kite mark BSEN 14680

Technical Data Sheet

Safety Data Sheet

Related Products