Everbuild Glass Protector - Red (600mm x 25m) 
ALM Code 6 Milled Lead Flashing - 510mm x 6m 
Code 7 Cast Lead - 300mm x 3m 
Code 6 Cast Lead - 1200mm x 6m 
Bond It Contractors PVA - 25L White 
Everflex Premium+ 450 Builders Silicone – Translucent 300ml (Box of 25) 
Soudafoam Gap Filler Gun Grade – 750ml (Box of 12) 
Everbuild Lumberjack 550 Floor Adhesive – 600ml (Box of 12) 
Ronseal 6 Year Anti Mould Paint - White Matt 750ml 
Soudal Orange Skeleton Gun - Up to 310ml 
Code 5 Cast Lead - 760mm x 3m 
DeWalt 18V XR Compact Jobsite Blower Bare Unit - (DCV100-XJ) 
Bond It Rubber Bitumen Emulsion - Black 5L 
Bond It Pro-Mate LMA Silicone - White EU3 
Timco Premium Dry Diamond Core Drill Kit 5pcs 
Soudal PVCu Solvent Frame Cleaner - 1L (Box of 12) 
Bond It Cyanoacrylate Superglue Hi Viscosity - Clear 20g 
ALM Code 3 Milled Lead - 1600mm x 3m 
Code 8 Cast Lead - 1200mm x 6m 
Easy-Trim End Cap Half Round - Black (Box of 10) 
Uses
The Stick2 Superglue GP by Everbuild is ideal for perfectly fitting surfaces that need to be bonded, with its curing time of only 10-15 seconds. It offers small but effective gap-filling properties suitable for up to 0.1mm and is a convenient single-component adhesive. It's an environmentally friendly alternative glue, and this is due to its economical usage alongside its solvent-free composite. Surfaces that this product is excellent for bonding include;
- Plastics
- Metals
- PVCu
- EPDM
Preparation
Surfaces to be bonded must be cleaned, dry and free from contaminants that can hinder the adhesion, such as dirt, dust, oil, grease, etc. To avoid chilling glue lines, store surfaces in a warm environment before bonding, and when commencing the application, ensure there's a relative humidity of 50%+
Application
- Unscrew the cap of the product
- Squeeze the product to one surface only
- Press the surface and hold them together for at least 10 seconds, taking care with the aligning as the open time is short.
Limitations and Notes
- This product should be used in applications that are constantly immersed in water.
- Ensure the surfaces are degreased before bonding
- Ensure surfaces are close fitting as it doesn't bridge gaps
- Do not use on surfaces or products that are bitumen or tar-leaching
