Ronseal Diamond Hard Floor Varnish - Clear Gloss 5L 
Evercryl Emergency Roof Repair - Clear 310ml (Box of 12) 
Cromar Bitumen Trowel Mastic - Black 1L 
Klober Boll Roll Tile Vent KG6085, Brown 
Everbuild Opti-Mix Mortar Plasticiser – 1 Litre 
ALM Code 7 Milled Lead - 450mm x 3m 
Timco M5 Form A Washer DIN 125 - 50 Pieces 
Code 6 Cast Lead - 450mm x 3m 
ALM Code 8 Milled Lead - 300mm x 3m 
Bond It Lead Pro Roofing & Flashing Sealant - Grey EU3 
Freeflow 112mm Round Gutter System 90° Gutter Angle - Black 
Code 4 Cast Lead - 210mm x 6m 
Everbuild Carpet Fix Cloth Tape – 50mm x 25m 
Klober Profile-Line Limarech Tile Vent - Terracotta KG9859-3-0152 (Box of 10) 
Soudal Swipex Wipes - 100 Wipes (Box of 6) 
Bond It B1 Fire Resistant PU Gun Grade Expanding Foam - Pink 750ml 
ALM Code 3 Milled Lead - 300mm x 3m 
Soudal Sealant Remover – 400ml 
Timloc Non-Profile Tile Vent Brown (Box of 8) 
Timloc InvisiWeep Extension Tube - 500mm Clear 
Bond It Rain-Mate All Weather Sealant - White EU3 
OX Tools OXIT Sealant & Adhesive - Clear 290ml (Box of 12) 
Timloc Inline Slate Vent Black (Box of 5) 
Code 8 Cast Lead - 600mm x 6m 
Ronseal One Coat Water-Based Tile Paint - Black Satin 750ml 
Everbuild Jetcem Plaster Rapid Repair – 6kg 
Uses
Wood Stain Satin by Everbuild is an excellent wood staining product with a formula specially designed to offer rejuvenation, protection and a flawless finish. This product is ideally used on a surface that a smooth planed timber. It doesn't apply well to rough surfaces. The typical areas of applications for Everbuild Wood Stain Satin include;
- Door Frames
- Window Frames
- Architectural timber
- Conservatories
- Cladding
- Garden Furniture
Preparation
Ensure you properly prepare the surface before applying and remove dust, dirt and similar contaminants. Any rough areas or edges must be smoothed down to allow optimal application, and any varnish or paint present must be sanded and stripped away.
Application
- Stir the product well before using it.
- Using a brush, apply the wood stain following the wood grain to optimise the varnish's colour.
- Apply 3 coats altogether, giving 4 hours between each coat. Before completing the final coat, lightly sand the surface, as this will provide a key for the final coat.
- Always apply the stain to a wet edge, working systematically across the surface, keeping the wet edge moving together as much as possible. After applying to the area, the finished appearance will be improved by feather brushing over the entire area with an unloaded brush, taking care to follow the wood grain.
Limitations
- The colour swatch label is an indication of the wood stain colour. Always test the colour in an inconspicuous area before completing the entire project.
- Do not use it on wood floors or decking.
- Protect from frost, do not apply below 10°C
- In high ambient temperatures or direct sunlight, you may not be able to maintain a wet edge which could lead to a poor finish.
- Ensure exterior wood/timber is treated with a non-repellent wood preservative before application, especially in areas subject to weathering.
