ALM Code 8 Milled Lead - 150mm x 6m 
Klober Boll Roll Tile Vent KG6085, Brown 
Sika 1 Waterproofer – 5 Litre 
Bond It Cover-It Carpet Protector - Clear 625mm X 25M 
Everbuild Ultra Hard Floor Varnish – Clear 2.5 Litre (Gloss) 
Everbuild Tecnic Silicone 825 – Limestone White 380ml (Box of 25) 
Soudal Silirub 2, White - 300ml 
Lead Flexi Slate Pipe Flashing - Flat 
Ronseal Precision Finish Brush - 0.5 Inch 
Klober Single Pantile Vent - Slate Grey KG9860-0429 (Box of 10) 
Everbuild KOS Fire Cement Buff – 500g 
Hambleside Danelaw Double Roman Tile Vent TV15/3 - Antique Red (Box of 5) 
OX Pro 6 Piece Bricklayers Set 
OX Trade XL Cuts All Tiles Diamond Blade 
Ronseal One Coat Stays White Radiator Paint - Matt 750ml 
Soudal B1 Fire & Acoustic Expanding Foam Genius - 600ml 
Everbuild Multi-Use Giant Wonder Wipes Tub (300 Wipes) 
Timco Copper Slate Straps 
The Eaves Protection Strip by IKO is a fantastic product that's perfect for installation underneath the slating of roof eaves. It is a bituminous roofing felt that helps direct the slates and rainfalls towards the guttering, preventing unwanted leaks into the property. When installed correctly, the protection strip will overhang the eave and should be fixed carefully to ensure all water is directed to the gutter. Care should be taken when installing, ensuring the strip doesn't sit in the gutter; otherwise, it can clog water flow.
Installation
When fixing the IKO Eaves Protection Strip, lay it parallel to the eaves and fixed with clout nails in every rafter 25mm from the top edge. The bottom edge of the strip should be dressed and detailed over the fascia, eave support board and tilt fillets into externally mounted guttering. A minimum overhang of 50mm or the centre of the gutter system should be completed, ensuring no material sits in direct contact with the guttering.
