Klober Profile-Line Adaptor & Flexipipe - KG979100 / KG979900 
ALM Code 6 Milled Lead Flashing - 510mm x 3m 
Timco M5 Form A Washer DIN 125 - 50 Pieces 
FloPlast Half Round Stop End Outlet, Black – 112mm 
Everbuild Stick2 Spray Contact Adhesive – Beige 500ml 
Ronseal Stays White One Coat Non-Drip Paint - Matt 2.5L 
Code 8 Cast Lead - 240mm x 3m 
ALM Code 5 Milled Lead - 1200mm x 3m 
Code 5 Cast Lead - 300mm x 3m 
Code 6 Cast Lead - 390mm x 6m 
Freeflow Square Gutter System Gutter 135° Angle - White 
Soudal Fix ALL Flexi – Grey 290ml (Box of 12) 
Klober 15x9 Tile Vent - Antique Red KG9690-0116 (Box of 10) 
Ox Tools OX Pro Heavy Duty Sealant Gun - 290ml to 400ml 
Ronseal Ultimate Finish Decking Applicator Refill Pads 
Oxyturbo Oxygen Refill 
Code 3 Cast Lead - 180mm x 6m 
Everbuild KOS Fire Cement Buff – 500g 
ALM Code 4 Milled Lead - 914mm x 3m 
If you’re laying a lead lined gutter and need a low-cost method of dealing with restricted falls, the Lead Expansion Joint has the problem covered. The Lead Expansion Joint uses a neoprene segment to compensate for lead’s thermal expansion.
Different materials expand at different rates when heated. This can cause damage when lead is fixed in certain positions, since lead expands to a very significant degree when heated. The neoprene segment present in Lead Expansion Joints will stretch and give, allowing this thermal expansion to take place safely. The neoprene itself is integrated into the code 5 lead wings on either side during the vulcanisation process. These wings can then be welded in to the two lead sheets being joined.
