£0.00

No products in the basket.

£0.00

No products in the basket.

FREE Next Working Day
Delivery over £10*

Soudal Fix ALL Flexi – Grey 290ml (Box of 12)

Home Shop Sealants & Adhesives Glue and Adhesives Soudal Fix ALL Flexi – Grey 290ml (Box of 12)
Product SKU: 106037x12
£57.49incl VAT.
£47.91excl VAT.
In Stock

Soudal Fix ALL Flexi Hybrid Sealant is a high-quality, neutral sealant that retains its elasticity even after fully curing. It’s a 1-component construction joint and adhesive sealant based on the SMX Hybrid Polymer.

  • Great weather and UV resistance
  • Stays elastic even after fully curing
  • Excellent adhesion to almost any surface, even if it’s slightly damp
  • Free from harmful toxic components, completely neutral sealant
  • Suitable for water-based paints to be applied onto
  • Impervious to organic growth, including mould, due to the product containing biocide with fungicide action
Frequently Bought Together:
-
+
£6.99 Incl VAT £5.83 Excl VAT
Soudal Orange Skeleton Gun, Up to 310ml
-
+
£7.99 Incl VAT £6.66 Excl VAT
-
+
£5.99 Incl VAT £4.99 Excl VAT
Total Price
£57.49 Incl VAT
£47.91 Excl VAT

Uses

Fix ALL Flexi Hybrid Sealant by Soudal is an excellent adhesive sealant with a flexible bond that is perfect for various applications. Soudal formulated the Fix ALL Flexi with durability and elasticity in mind, and this product works well in applications such as;

  • Application of sealing floor joints
  • Perfect for filling sanitary applications due to this product being wipeable once cured and resistant to organic growth.
  • Outstanding elastic bonding, perfect for vibrating construction applications
  • Great for general sealing and bonding within the building and construction industry.

Preparation

Ensure you prepare the surface correctly before starting the application, and remove any dirt, dust, oil, grease and similar impurities that can interfere with the adhesion. Porous surfaces in the water-loaded application should have a primer applied before application. Non-porous surfaces should be prepared with an activator or cleaner to optimise the adhesion.

Application

Cut the top of the cartridge, taking care not to damage the threaded screw

Screw the nozzle onto the cartridge and cut it at a 45° angle; ensure the opening is slightly larger than the gap to be filled

Using a standard sealant gun, apply the product into it and use a firm, even pressure on the gun handle when applying the product; this will optimise the adhesion and extrude an even bead.

Once you have completed the application, tool down with an applicator tool or wetted wooden spatula/spoon

Limitations

  • Please care when considering using paints on this product. This is due to the extensive range of water-based paints available; not all will be compatible with this product.
  • This product has excellent resistance to UV light. However, long, extreme exposure will cause discolouration but won't affect the adhesive strength.
  • When applying this product to plastics, please read the technical data sheet to understand its compatibility fully. If you are still determining what plastic you have, you can do a preliminary test instead.
  • This product should not be used as a glazing sealant or in building aquariums.
  • The total absence of UV light can cause the colour of the sealant to change.
  • In sanitary applications, you must maintain a clean sealant. Otherwise, you'll welcome the stimulation of fungi.

Additional information

Consistency

Stable paste

Curing system

Curing system

Skin formation (23°C/50% R.H.)

Ca. 10 min

Curing speed (23°C/50% R.H.)

2 mm/24h → 3 mm/24h

Hardness

40 ± 5 Shore A

Density

1,67 g/ml

Elastic recovery (ISO 7389)

> 75 %

Maximum allowed distortion (ISO 11600)

± 20 %

Max. tension (ISO 37)

1,80 N/mm²

Elasticity modulus 100% (ISO 37)

0,75 N/mm²

Elongation at break (ISO 37)

750 %

Temperature resistance

-40 °C → 90 °C

Application temperature

5 °C → 35 °C

Technical Data Sheet

Declaration of Performance

Product Information

Consistency

Stable paste

Curing system

Curing system

Skin formation (23°C/50% R.H.)

Ca. 10 min

Curing speed (23°C/50% R.H.)

2 mm/24h → 3 mm/24h

Hardness

40 ± 5 Shore A

Density

1,67 g/ml

Elastic recovery (ISO 7389)

> 75 %

Maximum allowed distortion (ISO 11600)

± 20 %

Max. tension (ISO 37)

1,80 N/mm²

Elasticity modulus 100% (ISO 37)

0,75 N/mm²

Elongation at break (ISO 37)

750 %

Temperature resistance

-40 °C → 90 °C

Application temperature

5 °C → 35 °C

Technical Data Sheet

Declaration of Performance

Related Products