EVO-STIK Sticks Like All Weather Adhesive - Clear 290ml 
Ronseal Stays White One Coat Non-Drip Paint - Satin 2.5L 
Everbuild Stick2 Rapid Epoxy Tube (2 x 12ml) 
OX Trade Jab Saw - 6.5" / 165mm & Holster Pack 
Everbuild 204 Evermix 3 in 1 - 5 Litre 
OB41 Electrical Contact Cleaner - 400ml 
Soudal Soudafoam Gap Filler Hand Held 750ml (Box of 12) 
ALM Code 8 Milled Lead - 390mm x 3m 
Timco Firmahold Hammer Tacker 
Chesterfelt Shed Roofing Felt - Green Standard 10m 
Code 3 Cast Lead - 450mm x 6m 
If you’re laying a lead lined gutter and need a low-cost method of dealing with restricted falls, the Lead Expansion Joint has the problem covered. The Lead Expansion Joint uses a neoprene segment to compensate for lead’s thermal expansion.
Different materials expand at different rates when heated. This can cause damage when lead is fixed in certain positions, since lead expands to a very significant degree when heated. The neoprene segment present in Lead Expansion Joints will stretch and give, allowing this thermal expansion to take place safely. The neoprene itself is integrated into the code 5 lead wings on either side during the vulcanisation process. These wings can then be welded in to the two lead sheets being joined.
