ALM Code 5 Milled Lead - 760mm x 6m 
Hambleside Danelaw TV15/7 Tile Vent - Antique Red (Box of 5) 
Ulti-Mate Stonewold Mk2 Roof Tile Vent - Grey 
Code 5 Cast Lead - 360mm x 6m 
Code 8 Cast Lead - 390mm x 6m 
Code 7 Cast Lead - 300mm x 6m 
Permavent Easy Slate 600 - Box of 100 
FloPlast Half Round Pipe Socket, Brown 
Permavent Easy Slate 500 - Box of 100 
Soudal PVCu Solvent Frame Cleaner - 1L (Box of 12) 
Ronseal Ultra Tough Mattcoat Clear Varnish - 2.5L 
ALM Code 6 Milled Lead Flashing- 1000mm x 6m 
If you’re laying a lead lined gutter and need a low-cost method of dealing with restricted falls, the Lead Expansion Joint has the problem covered. The Lead Expansion Joint uses a neoprene segment to compensate for lead’s thermal expansion.
Different materials expand at different rates when heated. This can cause damage when lead is fixed in certain positions, since lead expands to a very significant degree when heated. The neoprene segment present in Lead Expansion Joints will stretch and give, allowing this thermal expansion to take place safely. The neoprene itself is integrated into the code 5 lead wings on either side during the vulcanisation process. These wings can then be welded in to the two lead sheets being joined.
