Everbuild Seal Rite Strip / Smooth Out Twin Pack 
Code 6 Cast Lead - 360mm x 3m 
Ronseal One Coat Water-Based Tile Paint - White Gloss 750ml 
Bond It Professional Foam Gun Applicator 1M 
Hambleside Danelaw TV10/6 Flush Fit Tile Vent - Brown (Box of 5) 
ALM Code 4 Milled Lead - 1600mm x 3m 
Everbuild 701 Non-Slip Tile Adhesive – White 3.75kg 
Everbuild Forever Grey Silicone Sealant – 295ml 
Code 3 Cast Lead - 390mm x 3m 
Hambleside Danelaw Single Pantile Roof Tile Vent, TV10/8 - Brown (Box of 5) 
ALM Code 3 Milled Lead - 914mm x 3m 
Everbuild Superflow Sealant Gun - C3 (290ml - 310ml) 
ALM Code 5 Milled Lead - 600mm x 6m 
Everbuild PVC Hazard Tape - Black/Yellow (50mm x 33m) 
Code 4 Cast Lead - 1600mm x 3m 
ALM Code 8 Milled Lead - 760mm x 6m 
If you’re laying a lead lined gutter and need a low-cost method of dealing with restricted falls, the Lead Expansion Joint has the problem covered. The Lead Expansion Joint uses a neoprene segment to compensate for lead’s thermal expansion.
Different materials expand at different rates when heated. This can cause damage when lead is fixed in certain positions, since lead expands to a very significant degree when heated. The neoprene segment present in Lead Expansion Joints will stretch and give, allowing this thermal expansion to take place safely. The neoprene itself is integrated into the code 5 lead wings on either side during the vulcanisation process. These wings can then be welded in to the two lead sheets being joined.
