Ox Pro Ultraflex Finishing Trowel - 16" (405mm x 110mm) 
SikaFlex 221 Adhesive & Sealant - Black 300ml (Box of 12) 
Ronseal Stays White Ultra Tough White Gloss Paint - 2.5L 
Code 4 Cast Lead - 300mm x 3m 
OX Pro Tuff Rule - Cyan 
Everbuild Industrial Superglue HV – Clear 20g 
Ronseal Stays White One Coat Non-Drip Paint - Matt 750ml 
Ronseal One Coat Stays White Radiator Paint - Matt 250ml 
Gorilla Super Glue Gel Twin Pack - Clear 3g 
Bostik Penetration Primer For Roofs, Black - 5 Litre 
OX Pro Mini Square Mouth Shovel 
OX Tools Pro Heavy Duty Flexi Tub - 42L 
FloPlast Round Line Downpipe Clip, Black 
OX Tools Pro Torpedo Level, 9" / 230mm 
Klober Profile-Line Flat Tile Vent - Brown KG9856-3-0247 (Box of 10) 
Everbuild Forever Clear Silicone Sealant – 295ml (Box of 12) 
FloPlast Round 92½° Bend - Brown 
ALM Code 8 Milled Lead - 1200mm x 3m 
ALM Code 6 Milled Lead Flashing - 210mm x 6m 
Soudal Gap Filler Expanding Foam Genius Gun 300ml - Champagne 
Everbuild Power Pro Sealant Gun - 290 to 380ml (Box of 12) 
Bond It B3 Fill And Fix Expanding Foam Aerosol - Beige 500ml 
Everbuild Everflex AquaMate Aquarium Sealant – Translucent 295ml 
Everbuild 501 PVA – 500ml 
Ronseal Crystal Clear Outdoor Varnish is an outstanding product with an innovative formula that delivers excellent sealing properties without changing the colour of the surface. This high-quality varnish seals the surface, providing excellent water-resisting properties and highlighting the natural wood.
Preparation
To ensure an optimal finish on previously stained or varnish wood, you should sand down the surface using 120-grit sandpaper, working in a circular motion to remove any old varnish or stain. After sanding the surface, use white spirit and a cloth to clean the surface from dust.
When applying to new wood, you should lightly sand the surface using 120-grit sandpaper, ensuring there is no imperfection on the surface. After, use white spirit and a cloth to clean the surface of any leftover dust.
Application
- Open the tin and thoroughly stir it, ensuring no lumps are in the varnish
- Using a brush, apply the varnish brushing in the direction of the wood grain
- Allow six hours to pass for the coat to dry
- To achieve optimal results, you should apply three coats, but before applying the final coat, lightly sand the surface
Aftercare
After the varnish has dried, you can maintain the quality of it by cleaning the surface, ensuring that no grime or dirt builds up. Any tools used during the application process can be cleaned using warm, soapy water. If you notice any damage to the surface, lightly sand the surface and apply the varnish to it.
