Left Hand Klober Contract Dry Verge Unit Grey 
Thompson's Water Seal - 5L 
Code 4 Cast Lead - 510mm x 3m 
Ronseal Diamond Hard Floor Wax - Natural 2.5L 
Cromar All Weather Roof Coat - Black 5 Litre 
ALM Code 5 Milled Lead - 510mm x 3m 
Soudal Decorators Caulk – White 290ml (Box of 24) 
Freeflow Square Gutter System Gutter 90° Angle - Black 
Bond It PVA & Adhesive Sealer - White 5L 
Code 8 Cast Lead - 850mm x 3m 
ALM Code 6 Milled Lead Flashing - 760mm x 3m 
Soudal B1 Fire & Acoustic Expanding Foam Genius - 600ml 
Bond It Contractors PVA - 25L White 
Hambleside Danelaw TV15/4 Tile Vent - Slate Grey (Box of 5) 
Hambleside Danelaw (HD TVSPA) Tile Vent Adaptor and Flexi for TV15 Range 
Everbuild Professional Sealant Gun - C3 (280ml - 310ml) 
ALM Code 3 Milled Lead - 210mm x 3m 
Hambleside Danelaw Double Pantile Vent TV15/2 - Slate Grey (Box of 5) 
Everbuild Jetcem Deep Rapid Repair Sand & Cement – 2kg 
Soudal Lead Sheet Sealant 290ml - Grey (Box of 12) 
Sika Dustproofer – Clear 5 Litre 
Ronseal Multi Purpose Powder Smooth Finish Filler - 500g + 50% 
ALM Code 8 Milled Lead - 510mm x 3m 
Soudal Manual Foil Pack Gun Aluminium, 600ml (Sealant Gun for Sausages) 
Uses
The Multi-Purpose Powder Smooth Filler by Ronseal delivers excellent, quick internal repairs for various surfaces. Its high-quality formula offers a robust, long-lasting repair supporting gaps up to 40mm. Some of the surfaces that this product is suitable for include;
- Plaster (Internal only)
- Stone (Internal & External)
- Concrete (Internal & External)
- Wood (Internal & External)
Preparation
Before applying, ensure you prepare the surface to optimise the adhesion. To clean the area, wipe it down, removing any dust, grease, dirt and other contaminants that can interfere with the bonding.
Application
- Using the measuring scoop, measure 2 parts filler and mix it with 1 part water.
- Fill the hole using the formula you've created, ensuring you cover all cracks and crevices.
- Smooth it down with a wet knife once you've filled the area, but make sure it bulges out slightly to allow sanding when dry for a smooth, flush finish.
- If the gap is more significant than 40mm, apply in intervals of 40mm, giving a couple of hours to dry between each layer.
- After filling the entire area, give it a couple of hours to dry and then sand it down.
Aftercare
Remove any excess formula on any tools using a damp cloth
