Bond It Bitumen Paint - Black 1L 
Ronseal uPVC Paint - White Satin 2.5L 
Klober Single Pantile Vent - Terracotta KG9860-0152 (Box of 10) 
ALM Code 8 Milled Lead - 850mm x 6m 
FloPlast Half Round Gutter 90° Bend, Black – 112mm 
Ronseal Exterior Yacht Varnish - Gloss 250ml 
Easy-Trim Universal Dry Verge System Terracotta (Box of 50) 
Everbuild 501 PVA - 1 Litre 
Evo-Stik Liquid Nails Solvent Free - Buff 290ml 
Ronseal Knot Block Primer & Undercoat - White 250ml 
Bond It Heavy Duty Gun Foam Applicator 
Hambleside Danelaw TV15/1 Flush Fitting Tile Vent - Terracotta (Box of 5) 
FloPlast Half Round Fascia Bracket, Black – 112mm 
Everbuild Quick Drying Clear Varnish - Matt 2.5L 
Timco Copper Disc Rivets 
OX Heavy Duty Soft Gel Filled Knee Pad 
ERidge Dry Fix Ridge System Black – 6m Kit 
Hambleside Danelaw Double Roman Tile Vent TV15/3 - Antique Red (Box of 5) 
Everbuild Wood Adhesive 502 – 500ml 
Timloc Underlay Felt Lap Vent (Box of 50) 
Freeflow 112mm Round Union Gutter Bracket - White 
OX Trade Plastering Trowel - 11 inch / 280mm 
FloPlast Square Line Pipe Branch White – 65mm 
Everbuild KOS Black Fire Cement - 1kg 
FloPlast Round Shoe - White 
Ronseal Stays White One Coat Non-Drip Paint - Gloss 750ml 
Everbuild Everflex 200 Contractors LMA Silicone - Black 295ml 
Uses
The Multi-Purpose Powder Smooth Filler by Ronseal delivers excellent, quick internal repairs for various surfaces. Its high-quality formula offers a robust, long-lasting repair supporting gaps up to 40mm. Some of the surfaces that this product is suitable for include;
- Plaster (Internal only)
- Stone (Internal & External)
- Concrete (Internal & External)
- Wood (Internal & External)
Preparation
Before applying, ensure you prepare the surface to optimise the adhesion. To clean the area, wipe it down, removing any dust, grease, dirt and other contaminants that can interfere with the bonding.
Application
- Using the measuring scoop, measure 2 parts filler and mix it with 1 part water.
- Fill the hole using the formula you've created, ensuring you cover all cracks and crevices.
- Smooth it down with a wet knife once you've filled the area, but make sure it bulges out slightly to allow sanding when dry for a smooth, flush finish.
- If the gap is more significant than 40mm, apply in intervals of 40mm, giving a couple of hours to dry between each layer.
- After filling the entire area, give it a couple of hours to dry and then sand it down.
Aftercare
Remove any excess formula on any tools using a damp cloth
