Ronseal Diamond Hard Floor Varnish - Clear Gloss 5L 
Evercryl Emergency Roof Repair - Clear 310ml (Box of 12) 
Cromar Bitumen Trowel Mastic - Black 1L 
Klober Boll Roll Tile Vent KG6085, Brown 
Everbuild Opti-Mix Mortar Plasticiser – 1 Litre 
ALM Code 7 Milled Lead - 450mm x 3m 
Timco M5 Form A Washer DIN 125 - 50 Pieces 
Code 6 Cast Lead - 450mm x 3m 
ALM Code 8 Milled Lead - 300mm x 3m 
Bond It Lead Pro Roofing & Flashing Sealant - Grey EU3 
Freeflow 112mm Round Gutter System 90° Gutter Angle - Black 
Code 4 Cast Lead - 210mm x 6m 
Everbuild Carpet Fix Cloth Tape – 50mm x 25m 
Klober Profile-Line Limarech Tile Vent - Terracotta KG9859-3-0152 (Box of 10) 
Soudal Swipex Wipes - 100 Wipes (Box of 6) 
Bond It B1 Fire Resistant PU Gun Grade Expanding Foam - Pink 750ml 
ALM Code 3 Milled Lead - 300mm x 3m 
Soudal Sealant Remover – 400ml 
Timloc Non-Profile Tile Vent Brown (Box of 8) 
Timloc InvisiWeep Extension Tube - 500mm Clear 
Bond It Rain-Mate All Weather Sealant - White EU3 
OX Tools OXIT Sealant & Adhesive - Clear 290ml (Box of 12) 
Timloc Inline Slate Vent Black (Box of 5) 
Code 8 Cast Lead - 600mm x 6m 
Ronseal One Coat Water-Based Tile Paint - Black Satin 750ml 
Uses
The One Coat Tile Paint by Ronseal offers high-quality colour and protection to your tiles, delivering a product that can revive old-dated tiles into modern, refreshing ones. All of this is achieved with just one coat, proving how exceptional this product is.
Preparation
Before commencing the application, ensure the room is above 10°C and lay dust sheets over the surface and objects you don't want the paint to spill onto. Use a grout cleaner and perform remedial work for any grout that needs cleaning. After you've done both, you should wipe down the tiles, cleaning them and removing any contaminants that can hinder the paint's adhesion.
Application
- Thoroughly stir the paint, ensuring you mix all the pigments.
- Apply the paint directly to the tile with vertical strokes using a synthetic brush.
- The paint will be touch dry in around an hour, but don't allow water to touch it for 24 hours.
- This product may not cover bold colours in the first coat, and if so, lightly sand the tile using 240-grit paper and paint another coat over it. You should wait 4 hours for the first coat to dry before applying the second.
Aftercare
Remove as much paint from your brush or roller as possible, then wash it using warm, soapy water. Do not empty any leftover paint into drains or water courses. You should also protect this product from frost.
When cleaning the tiles, avoid using abrasive cleaners as they can damage the paint; instead, wash it with soapy water. Avoid water or high humidity coming into contact with the paint while drying.
