Sika Stone Protector - Clear 5 Litre 
ALM Code 7 Milled Lead - 760mm x 3m 
Ronseal Crystal Clear Outdoor Varnish - Satin 250ml 
Ronseal Ultra Tough Satincoat Clear Varnish - 5L 
OX Tools 14 inch / 350mm Pro Stainless Steel Plasterers Mud Pan 
Soudal Genius Gun Gap Filling Foam - 750ml 
Cromar Vent 3 Light Breathable Membrane - 1m x 25m 
Ronseal Stays White One Coat Non-Drip Paint - Gloss 750ml 
ALM Code 5 Milled Lead - 390mm x 6m 
Permavent Easy Slate 500 - Box of 100 
Samac Aluminium Clout Nails - 50mm x 3.35mm 10kg Box 
Klober Boll Roll Tile Vent KG6085, Brown 
OB41 White Grease Spray - 400ml 
OX Pro Harling Trowel - 165mm X 165mm 
Everbuild Black Jack 903 Bitumen Trowel Mastic – 5 Litre 
ALM Code 6 Milled Lead Flashing - 150mm x 3m 
Ronseal Diamond Hard Floor Paint - Anthracite Satin 750ml 
Uses
The Trade Polyurethane Satincoat Varnish by Ronseal offers your interior wood the highest level of protection. With its trade tier quality, this product is only used by those seeking the best results. Perfect for all types of wood found in the interior. However, this product is unsuitable for application onto wooden floors.
Preparation
Sand the surface of the wood down using 120-grit paper. It's advised to wear a mask in this process to avoid inhaling dust particles. After you've sanded the surface, wipe it down with white spirit and let it dry.
Application
- Stir the tin thoroughly to mix the paint.
- Using a brush, apply a coat onto the wood following the direction of the grain.
- Leave 6 hours for the layer of paint to dry, then apply a second coat.
- Before applying the 3rd and final coat, you should slightly sand the surface down. It will optimise the last coat and presents the best quality finish.
Aftercare
Any leftover varnish on your brush can be washed off using white spirit. Don't let any of the leftover varnishes go down into the drain or watercourses.
