Bond It Professional Foam Gun Applicator 
Cromar Vent 3 Pro Breathable Membrane 1m x 50m 
Sika Stone Protector - Clear 5 Litre 
Code 4 Cast Lead - 210mm x 6m 
ALM Code 7 Milled Lead - 760mm x 6m 
Ronseal Anti-Bacterial Worktop Oil - Clear 500ml 
Soudal Grip All Solvent-Based - 290ml 
Bond It A43 Threadlock Oil Tolerant Adhesive - 25ml Blue 
Code 6 Cast Lead - 1000mm x 3m 
Bond It Rubber Bitumen Emulsion - Black 25L 
Everbuild PVCu Acti-Spray – Clear 200ml (Box of 12) 
ALM Code 5 Milled Lead - 850mm x 3m 
Bond It Pro-Mate LMA Silicone - White EU3 
Timloc Mini Castellated Tile Vent Brown (Box of 14) 
Timloc Non-Profile Tile Vent Brown (Box of 8) 
Soudal Orange Skeleton Gun - Up to 400ml 
1201 Telescopic Underfloor Vent 3-5 Courses 
Uses
The Trade Polyurethane Mattcoat Varnish by Ronseal offers your interior wood the highest level of protection. With its trade tier quality, this product is only used by those seeking the best results. Perfect for all types of wood found in the interior. However, this product is unsuitable for application onto wooden floors.
Preparation
Sand the surface of the wood down using 120-grit paper. It's advised to wear a mask in this process to avoid inhaling dust particles. After you've sanded the surface, wipe it down with white spirit and let it dry.
Application
- Stir the tin thoroughly to mix the paint.
- Using a brush, apply a coat onto the wood following the direction of the grain.
- Leave 6 hours for the layer of paint to dry, then apply a second coat.
- Before applying the 3rd and final coat, you should slightly sand the surface down. It will optimise the last coat and presents the best quality finish.
Aftercare
Any leftover varnish on your brush can be washed off using white spirit. Don't let any of the leftover varnishes go down into the drain or watercourses.
