Everbuild 502 Wood Adhesive – 5 Litre 
Soudal Sealant Remover – 400ml (Box of 12) 
Ronseal Trade 10Yr Woodstain Satin Walnut 2.5ltr Brown 
Code 6 Cast Lead - 1600mm x 3m 
Everbuild Anchorset Green 300 - Grey 300ml 
Armatool Slate Rip - Stainless Steel 
ERidge Dry Fix Ridge System Black – 6m Kit 
Bond It Economy Sealant Gun - Blue 300ml 
ALM Code 8 Milled Lead - 300mm x 6m 
Ronseal Diamond Hard Floor Varnish - Clear Satin 5L 
Hambleside Danelaw TV15/4 Tile Vent - Terracotta (Box of 5) 
FloPlast Half Round External Stop End, Black – 112mm 
Ronseal Stays White One Coat Non-Drip Paint - Matt 750ml 
Code 4 Cast Lead - 150mm x 3m 
Cavity Wall Weep Extension 
Bond It PVA & Adhesive Sealer White 1L - Box of 12 
Everbuild Everflex 200 Contractors LMA Silicone - Black 295ml (Box of 25) 
Bond It Contractors PVA - 1L White 
Hambleside Danelaw Single Pantile Roof Tile Vent, TV10/8 - Antique Red (Box of 5) 
Everbuild Stixall Extreme Power – Brown 290ml 
Uses
The Trade Polyurethane Satincoat Varnish by Ronseal offers your interior wood the highest level of protection. With its trade tier quality, this product is only used by those seeking the best results. Perfect for all types of wood found in the interior. However, this product is unsuitable for application onto wooden floors.
Preparation
Sand the surface of the wood down using 120-grit paper. It's advised to wear a mask in this process to avoid inhaling dust particles. After you've sanded the surface, wipe it down with white spirit and let it dry.
Application
- Stir the tin thoroughly to mix the paint.
- Using a brush, apply a coat onto the wood following the direction of the grain.
- Leave 6 hours for the layer of paint to dry, then apply a second coat.
- Before applying the 3rd and final coat, you should slightly sand the surface down. It will optimise the last coat and presents the best quality finish.
Aftercare
Any leftover varnish on your brush can be washed off using white spirit. Don't let any of the leftover varnishes go down into the drain or watercourses.
