Everbuild Bath & Kitchen Sealant - 200ml 
Bond It Bitumen Paint - Black 5L 
OX Tuff Carbon Marking Pencil Value Pack 
Everbuild 701 Non-Slip Tile Adhesive – White 7.5kg 
OX Pro OX-P133855 Easy Start Handsaw 550mm / 22in 
ALM Code 5 Milled Lead - 180mm x 6m 
Ronseal Ultra Tough Mattcoat Clear Varnish - 2.5L 
Code 4 Cast Lead - 180mm x 3m 
Ronseal Stays White One Coat Non-Drip Paint - Matt 750ml 
Code 8 Cast Lead - 1600mm x 6m 
Timco Extra Heavy Duty Hand Cleaner with Pump - 4 Litres 
Bond It Sealant Applicator Tool 
Pinkgrip Dryfix Applicator Gun 
Timco Twin-Cut C2 Floor-Fix Screws - 4.2mm x 55mm (Tub of 250) 
Everbuild Safer Spirit - 750ml 
Timco Metal Cavity Anchors - M5 x 37 (45mm Screw) Pack of 70 
Soudal Fix ALL Turbo - White 290ml 
Timco Multi-Fix Masonry Bolts, Hex Head 25pcs - 10.0 x 150mm 
Klober Profile-Line Flat Tile Vent - Brown KG9856-3-0247 (Box of 10) 
OX Pro Heavy Duty Aviation Snips Left Cut (Red) 
Everbuild P45 Foam Applicator Gun 
10 x Timloc 3014C Over Fascia Ventilation System 1M - Black 
Uses
The Sikaflex 221 Adhesive & Sealant by Sika is a fantastic, multi-purpose adhesive and sealant with brilliant elastic properties even after curing. It has excellent adhesion to various substrates and is suitable for metal, metallic primers, paint coatings, ceramic materials and plastics. Sika formulated this product to be compatible with paints, but it's vital to complete a preliminary test before completing the whole application. Despite the Sikaflex 221 being flexible, many paints are not; therefore, cracking and unsightly damages may occur.
Preparation
Surfaces to be bonded must be free from contaminants that can interfere with the bonding process. Focus on removing dirt, dust, oil, grease, etc., and then ensure the surface is dry afterwards.
Application
- Take a screwdriver or a similarly shaped, tough item and pierce the Sikaflex 221
- Cut the nozzle at a 45° angle with an opening to the required amount and screw it onto the cartridge.
- Place the cartridge into a standard sealant applicator tool/gun, and point the tip of the nozzle to the surface or gap to bond or fill and extrude the Sikaflex 221
- For perimeter pointing, apply it from one size to the other in one continuous bead - For adhesion, cover the surface with a zig-zag motion, allowing the material to extrude onto and bring the surfaces together and hold them tight.
