ALM Code 3 Milled Lead - 210mm x 6m 
ALM Code 4 Milled Lead - 450mm x 3m 
Ronseal Big Hole Smooth Finish Filler - Grey 1.2Kg 
Ronseal One Coat Stain Block - White 750ml 
Soudal Soudafoam Gap Filler Hand Held 750ml (Box of 12) 
Easy-Trim Lead R Flashing Textured – 300mm x 5m 
Bond It Rain-Mate All Weather Sealant Black EU3 - Box of 12 
Everbuild Dual Purpose Foam Cleaner – 500ml 
Ronseal Quick Drying Smooth Finish Filler - 600g 
Klober Profile-Line Flat Tile Vent - Antique Red KG9856-3-0116 (Box of 10) 
Easy-Trim Over Fascia Vent - 25mm x 500mm (Box of 50) 
Freeflow 112mm Round Union Gutter Bracket - White 
OX Pro Tough Bucket, Blue - 15 Litre 
Everbuild EB25 Ultimate Sealant & Adhesive – Anthracite 300ml (Box of 12) 
Roughneck® Gorilla Bar Twin Pack - 35cm & 55cm (14in & 22in) 
Bond It Flash-Mate Lead Sealant - Grey EU3 
Timco Hazard Tape 
FloPlast Universal Hopper, Black – 65-68mm 
ALM Code 7 Milled Lead - 360mm x 6m 
Soudal Parquet & Timber Sealant - Dark Grey 290ml 
Leather Roofers Tool & Nail Pouch, Dark Brown 
Siroflex LMN Silicone - Doors & Windows - Black 300ml 
Thompson's uPVC Restorer - 480ml 
Uses
The Waterproof PVA by SikaBond is the ultimate, high-quality admixture that delivers exceptional bonding and sealing properties, enhancing water resistance and increasing adhesion. Compared to other waterproof PVA admixtures, the Waterproof PVA by SikaBond sits above the rest on the market because it is easy to use and, unlike normal PVA, will not re-emulsify when wet. Applications this product is typically applied in include;
- Excellent for renders or toughening floors and screeds
- Waterproofs PVA adhesive and admixture, which seals, primes, toughens and waterproofs
- Suitable for brickwork, mortar, render, screed and plaster.
Preparation
Ensure the application surface is sound, stable and free from contaminants that can interfere with this product, including dirt, dust, grease, oil, standing water, cracked or loose materials, etc.
Application
- Shake the bottle well before using
- Apply directly to the surface using a brush or roller
Alternatively;
- Pour it directly into a cement admixture
- The quantity for dilution depends on the surface porosity.
- Allow primer to dry before laying bonding coats (for non-absorbent surfaces, the sealer coat may be omitted)
- Apply the cement screed, render or plaster while the bonding coat is still tacky.
Limitations and Notes
- Do not apply this product below 10°C
- Do not use it on surface if rain is imminent, as it'll wash it off
