Timco Skeleton Gun 
Everbuild Griptite Construction Adhesive - 350ml 
Ronseal Exterior Yacht Varnish - Satin 500ml 
Timloc Non-Profile Tile Vent Grey (Box of 8) 
Klober Profile-Line Limarech Tile Vent - Antique Red KG9859-3-0116 (Box of 10) 
Easy-Trim Lead R Flashing Textured – 300mm x 5m 
ALM Code 4 Milled Lead - 390mm x 6m 
Everbuild P13 Plumbers Putty - Beige 750g 
Everbuild KOS Fire Cement Buff – 500g 
Siroflex Painters Caulk-It - 310ml 
Timco Flat Wood Bit 1/4" Extension Rod - 300mm 
Everbuild Mammoth Clear Weatherproof Tape 
Soudal Soudafoam Gap Filler Hand Held 750ml 
Azpects EASYSeal Sandstone Enhancer and Sealer 5L 
Everbuild Lumberjack 30 Minute Polyurethane Wood Adhesive Gel – 310ml 
OX Trade Metric Tape Measure - 8m 
Bond It Monster Scrim Drywall Tape - White 48mm x 90m 
Hambleside Danelaw (HD DPCA) Tile Vent Adaptor for TV10 Range 
Ronseal Interior Varnish - Clear Satin 2.5L 
Bond It Cove-Mate Coving Adhesive - White EU3 
Soudal Construction Silicone, Clear - 290ml 
Everbuild KOS Black Fire Cement - 500g 
OX Tools Pro Carpenters Square & Angle Finder 300mm / 12in 
Hambleside Danelaw TV15/1 Flush Fitting Tile Vent - Black (Box of 5) 
Ronseal Ultra Tough Satincoat Clear Varnish - 5L 
Ronseal Expanding Foam Filler - 500ml 
Ronseal Ultra Tough Mattcoat Clear Varnish - 750ml 
Uses
The Waterproof PVA by SikaBond is the ultimate, high-quality admixture that delivers exceptional bonding and sealing properties, enhancing water resistance and increasing adhesion. Compared to other waterproof PVA admixtures, the Waterproof PVA by SikaBond sits above the rest on the market because it is easy to use and, unlike normal PVA, will not re-emulsify when wet. Applications this product is typically applied in include;
- Excellent for renders or toughening floors and screeds
- Waterproofs PVA adhesive and admixture, which seals, primes, toughens and waterproofs
- Suitable for brickwork, mortar, render, screed and plaster.
Preparation
Ensure the application surface is sound, stable and free from contaminants that can interfere with this product, including dirt, dust, grease, oil, standing water, cracked or loose materials, etc.
Application
- Shake the bottle well before using
- Apply directly to the surface using a brush or roller
Alternatively;
- Pour it directly into a cement admixture
- The quantity for dilution depends on the surface porosity.
- Allow primer to dry before laying bonding coats (for non-absorbent surfaces, the sealer coat may be omitted)
- Apply the cement screed, render or plaster while the bonding coat is still tacky.
Limitations and Notes
- Do not apply this product below 10°C
- Do not use it on surface if rain is imminent, as it'll wash it off
