Everflex Contract AC50 Acoustic Sealant & Adhesive - White 900ml (Box of 12) 
Everbuild Everflex 195 Siliconised Acrylic Sealant - White 300ml 
Everbuild Everflex Heat Mate Sealant - Red 295ml 
Soudal Grab Solvent Based Adhesive, Beige 
Spax Magnetic Bit Holder - 1 Piece 
Bostik Flexacryl Instant Repair Waterproofing - Grey 5kg 
FloPlast Round Shoe - White 
Soudal Silirub 2, White - 300ml (Box of 12) 
Soudal Roof & Gutter Sealant – Black 290ml 
ALM Code 5 Milled Lead - 510mm x 6m 
Bond It Duct Tape - Black 48mm x 45M 
Ronseal Exterior Yacht Varnish - Gloss 250ml 
Ronseal Multi Purpose Smooth Finish Filler - 330g 
FloPlast Ogee Fascia Bracket, White 
Easy-Trim Universal Dry Verge System - Grey (Box of 50) 
Timco Mixed Cable Clips 
Timco Mixed Hose Clips 
ALM Code 3 Milled Lead - 390mm x 3m 
Bond It Expanding Foam Cleaning Fluid - Clear 500ml 
Klober Thin Line Vent - Antique Red KG9855-3-0116 (Box of 10) 
Ronseal Fence Life Brush - 4" 
Code 7 Cast Lead - 510mm x 6m 
Timloc Standard Roof Tile Vent Adaptor 
Easy-Trim Ridge F Universal 6m Dry Ridge Kit - Pallet of 84 + FREE DeWalt XR Combi Drill + Impact Twin Pack 
Everbuild Wood Adhesive 502 – 500ml 
Uses
The 5 Min Gel PU Wood Adhesive by Soudal is a fantastic cartridge-stored glue that provides superior bonding strength. It's excellent for use with all types of wood, utilising its polyurethane composite to fill gaps in uneven surfaces, making it versatile and superior to its competitors. This product is forged with excellent resistance, allowing it to be used internally and externally, and its D4 water resistance enhances its protection. A unique feature of this product is its ability to bond window and door frames, including corner connections, complying with the relevant EN204 regulation.
Preparation
Before commencing the application, prepare the surface by removing all contaminants, including dirt, dust, grease, oil, organic growth, etc. It's important to check the condition of the wood, ensuring it's sound and stable. Finally, due to this product's moisture-curing process, lightly moistening the surface with water enhances the curing and bonding process.
Application
- Cut the top of the cartridge, taking care not to damage the threaded screw.
- Cut the nozzle at a 45° angle with an opening to your desired width
- Place the cartridge into a suitable applicator tool
- Apply the adhesive to one of the surfaces which are to be bonded; once you apply this, you'll have a 15-minute open time to bring the surfaces together.
- Bring the first surface to the other, compressing and clamping for at least 1 hour.
Limitation and Notes
- Clamping is required during the curing process as the adhesive strength is enhanced through it.
