ALM Code 5 Milled Lead - 210mm x 6m 
Bond It B3 Fill And Fix Expanding Foam Aerosol - Beige 500ml 
Siroflex Painters Caulk-It - 380ml 
Code 3 Cast Lead - 150mm x 3m 
Code 7 Cast Lead - 760mm x 3m 
Bond It Aluminium Foil Tape - 50mm x 45M (Box of 24) 
Bond It FG8 Food Grade Silicone - White 310ml 
Soudal Adhesive Remover - 400ml 
ALM Code 7 Milled Lead - 150mm x 6m 
OX Pro Dry Wall Internal Corner Trowel - 102mm x 127mm 
Everbuild Aquaseal Liquid Roof – Slate Grey 21kg 
Code 4 Cast Lead - 510mm x 6m 
Everbuild Stixall Extreme Power - Grey 290ml (Box of 12) 
ALM Code 3 Milled Lead - 914mm x 3m 
ALM Code 8 Milled Lead - 180mm x 6m 
Standard Brush 2-Inch 
Everbuild Forever Grey Silicone Sealant – 295ml (Box of 12) 
Ronseal One Coat All Surface Primer and Undercoat - White 250ml 
Ronseal Multi Purpose Smooth Finish Filler - 600g + 50% Free 
Uses
The Stay Fresh by Soudal is the ideal product for Tradespeople and D.I.Yers alike who are seeking a long-lasting, high-quality product to seal around areas with a durable bond. Soudal's technical team forged this product with fantastic resistance, focusing on preventing discolouration, resisting moisture and being entirely impervious to unsightly black mould. Its open time is longer compared to rival products on the market, allowing you to seal larger areas at a time and smoothly without concerns about skin forming.
Preparation
Before commencing the application, focus on removing any contaminants that are present to ensure a long-lasting, professional finish. This includes dirt, dust, grease, oil, organic growth, loose debris and flaking material. After removing everything, ensure the surface is dry, and then you're ready for the application.
Application
- Cut the top of the cartridge, taking care not to damage the threaded screw.
- Cut the nozzle at a 45° angle with an opening between 0.5mm to 30mm. The width is determined by the size of the gap to fill.
- Place the cartridge into a compatible sealant applicator tool.
- Point the tip of the nozzle at one end of the gap and apply one long, consistent bead across the gap.
- After applying the bead, you can tool it down to a smooth finish using a sealant tool or spatula that's dosed in a soapy solution.
Limitation and Notes
- Certain metals, natural stone and polycarbonate, are not suitable for use in conjunction with this product.
- This sanitary formula shouldn't replace the need for cleaning the joint.
- A total absence of UV or acidic environments can cause colour changes within the sealant.
- When tooling this product down, ensure that the soapy solution doesn't contact the surfaces; otherwise, it can interfere with the adhesion.
- Do not apply this product in areas subject to constant water immersion or for manufacturing aquariums.
- Contact with surfaces that bleed plasticisers, bitumen or tar is not compatible with this product.
