OX Pro Dry Wall External Corner Trowel - 100mm x 125mm 
Code 7 Cast Lead - 240mm x 3m 
ALM Code 5 Milled Lead - 1600mm x 6m 
Code 4 Cast Lead - 914mm x 3m 
OX Pro Chalk Refill, White – 226g 
Code 3 Cast Lead - 600mm x 3m 
OX Pro Grout Remover 
OX Trade Plastic Speed Rafters Square Set 
Everbuild Forever Clear Silicone Sealant – 295ml (Box of 12) 
ALM Code 8 Milled Lead - 390mm x 6m 
Thompson's Emergency Roof Repair Mastic - Black 750ml 
Freeflow 112mm Round Gutter System 90° Gutter Angle - Black 
Hambleside Danelaw Double Roman Tile Vent, TV15/3 - Black (Box of 5) 
Everbuild Mitre Fast Activator – 200ml (Box of 12) 
Gorilla Tape - Black (48mm x 32m) 
ALM Code 6 Milled Lead Flashing - 1000mm x 3m 
Soudal Neutral Stay Fresh Sanitary Silicone Sealant – Clear 300ml (Box of 12) 
Soudal Soudafoam Hand Held One Shot - 150ml (Box of 12) 
Soudal Pro 30D Waterproof Wood Adhesive - 750g 
Soudal Roof & Gutter Sealant – Black 290ml (Box of 12) 
Hambleside Danelaw (HD DPCSPA) Tile Vent Adaptor and Flexi for TV10 Range 
IKO Super Shed Felt - Green 8m Roll 
Everbuild Safer Spirit - 750ml 
OX Polyzipâ„¢ Flex C1 Cutter - 15mm to 28mm 
Code 6 Cast Lead - 510mm x 6m 
Bond It Rain-Mate All Weather Sealant - Black EU3 
Uses
ButyBand Flashing Tape by Soudal is an excellent product to seal areas of the roof securely, and it is formed with a high-quality butyl rubber that is protected with a layer of PET-reinforced aluminium. It can fill the connection joints around windows and doors and is suitable on surfaces such as;
- Glass
- Steel
- Plexiglas
- Polycarbonate
- Wood
- Aluminium
- PVC
Preparation
Before you apply this product, ensure that you prepare the surface to guarantee optimal adhesion. Remove any contaminants, including dust, dirt, oil, grease and similar impurities.
Application
Remove the protective foil evenly, pressing firmly onto the application area. Use a firm roller to ensure it's applied correctly and that no air bubbles, folds or other problems occur. This is because it affects this product's ability to adhere and protect against weathering. When overlapping two parts of this product, ensure it's at least 5cm.
Limitations
- Do not apply this product to frozen surfaces or surfaces with condensation.
- This product adheres through the impact of pressure applied, not by the duration. This is why a firm roller will aid in securely bonding the surfaces together.
