ALM Code 6 Milled Lead Flashing - 600mm x 6m 
Ronseal Diamond Hard Floor Varnish - Clear Gloss 5L 
Permavent Easy Slate 500 - Box of 100 
ALM Code 3 Milled Lead - 914mm x 6m 
Hambleside Danelaw Double Plain Tile Vent, TV10/9 - Brown (Box of 5) 
Hedgehog Gutterbrush Clips (Pack of 20) 
OX Pro Aluminium Hawk - 13 inch x 13 inch 
FloPlast Half Round Stop End Outlet, Black – 112mm 
IKO 5U Eaves Protection Strips - 16m x 330mm 
Everbuild Forever White Grout Reviver - 200ml 
OX Tools 12 inch / 300mm Trade Plastic Plasterers Mud Pan 
Code 8 Cast Lead - 360mm x 3m 
Soudal Insulating Foam Genius Gun 750ml - Champagne 
20 x Cromar Vent 3 Classic Breathable Membrane - 1m x 50m 
Soudal Swipex Wipes - 100 Wipes (Box of 6) 
Code 5 Cast Lead - 1000mm x 6m 
Timco Carpenter’s Speed Auger & Flat Wood Bit Kit 
Everbuild KOS Black Fire Cement - 1kg 
Timloc Plain & Interlocking Tile Vent Adapter 
YBS SuperQuilt Lite Multi-Layer Quilted Foil Insulation, 1.5m x 10m 
OX Pro Heavy Duty Aviation Snips Straight Cut (Yellow) 
Soudal Gap Filler Expanding Foam Genius Gun 300ml - Champagne 
Timloc Double Pantile Tile Vent Grey (Box of 6) 
Uses
The Genius Gun Soudafoam Window and Door by Soudal is an excellent polyurethane expanding foam that provides fantastic gap-filling and insulation benefits. Its fantastic insulation and thermal and acoustic properties are unmatched, putting this product at the forefront when installing windows and indoors. Areas in which this product is typically used include general foam applications, both static and non-static joints. Also, installation of windows and doors, filling cavities, sealing openings in roof construction and creating a sound and thermal barrier.
Preparation
Ensure that all surfaces that this product will contact are free from dirt, dust, grease, oil and similar contaminants that can interfere with the adhesion. All surfaces that this product will contact also need to be moistened with water to enhance curing and adhesion.
Application
- Shake the can thoroughly for about 20 seconds
- Open the cover and pull the folded tube to sit perpendicular to the aerosol
- Apply the polyurethane foam to the area, filling 1/3 of it and allowing the expanding foam to fill the rest
- If you have to work in layers, allow the first to cure, slightly moisten the surface and apply your second layer.
Limitations and Notes
- All surfaces that this product will contact must be slightly moistened
- Ensure you clean all uncured PU foam from the gun after each use. If you don't, you'll not be able to reuse the product
- This product can be reused for up to 6 months from first use.
