ALM Code 4 Milled Lead - 760mm x 6m 
Everbuild KOS Black Fire Cement - 500g 
ALM Code 6 Milled Lead Flashing - 390mm x 6m 
Everbuild PVCu Solvent Cleaner – 1 Litre (Box of 12) 
OX Tools Plasterers Bucket, Blue – 25 Litre 
Ronseal Stays White One Coat Non-Drip Paint - Matt 750ml 
Everbuild Tecnic Silicone 825 – Limestone White 380ml (Box of 25) 
Everbuild Industrial Superglue HV – Clear 20g 
Code 7 Cast Lead - 150mm x 3m 
Easy-Trim Lead R Flashing Smooth – 150mm x 5m 
Evo-Stik Liquid Nails Solvent Free - Buff 290ml 
Stanley Dynagrip Chisel Knife - 25mm 
Sika 1 Waterproofer – 5 Litre 
Freeflow 114mm Square Gutter Fascia Bracket - White 
Code 4 Cast Lead - 300mm x 6m 
ALM Code 3 Milled Lead - 800mm x 6m 
Code 8 Cast Lead - 180mm x 6m 
Code 6 Cast Lead - 1000mm x 6m 
Everflex Galva Mate Duct Sealant - C3 
Everbuild 701 Non-Slip Tile Adhesive – White 7.5kg 
Uses
The Mitre Bonding Kit Superglue Adhesive & Activator by Soudal is an outstanding, high-strength, rapid-curing glue perfect for various horizontal and vertical surfaces. This is achieved through the two-component system, which includes a cyanoacrylate adhesive and an activator. When used in conjunction with one another, this product increases the adhesive's performance and reduces curing times significantly.
Preparation
This product only requires a little preparation, but it's essential to complete it to ensure optimal results are achieved. Ensure all surfaces to be bonded are free from dust and grease.
Application
- Spray one of the surfaces with the activator and apply the adhesive to the other.
- Bring both surfaces together and press for at least one minute to allow it to cure fully.
Limitations and Notes
- After using the products, clean the nozzle to ensure no glue cures inside, and you can re-use it.
- You may use the adhesive without the activator, but curing times will be significantly longer.
