Code 3 Cast Lead - 240mm x 6m 
Code 4 Cast Lead - 600mm x 3m 
Everflex Premium+ 450 Builders Silicone – White 300ml (Box of 25) 
Everbuild Mortar & Tile Grout Pro Pointing Gun Kit 
ALM Code 7 Milled Lead - 914mm x 3m 
Ronseal Precision Finish Brush - 1.5 Inch 
Bond It Aerosol Spray Adhesive - 500ml Beige 
Easy-Trim Universal Dry Verge System - Terracotta 
Hambleside Danelaw TV15/1 Flush Fitting Tile Vent - Terracotta (Box of 5) 
Everbuild Forever Grey Silicone Sealant – 295ml 
ALM Code 8 Milled Lead - 210mm x 3m 
ALM Code 3 Milled Lead - 450mm x 6m 
FloPlast Universal Hopper, Brown – 65-68mm 
ALM Code 5 Milled Lead - 1000mm x 6m 
Everbuild Stick2 Industrial Superglue HV – Clear 50g (Box of 25) 
Restec CSM Fibreglass Roll 450g/m² - (15m² Roll) 
Hambleside Danelaw Double Plain Tile Vent, TV10/9 - Brown (Box of 5) 
Code 8 Cast Lead - 450mm x 6m 
Permavent Easy Slate 600 - Box of 100 
Everbuild 501 PVA - 2.5 Litre 
ALM Code 4 Milled Lead - 1200mm x 6m 
Klober Double Pantile Vent - Terracotta KG9858-3-0152 (Box of 10) 
Uses
The Trade Roof & Insulation Foam Genius is a convenient and superb product that provides outstanding polyurethane expanding foam delivered in a reusable container. The Genius Gun cap allows multiple uses out of the same can without concerns of clogging, allowing endless use. The product's formula is unrivalled, providing excellent value and thermal and acoustic insulation that's entirely freon-free. It's elastic, compressible, fast curing and suitable for use onto most common surfaces except PE, PP and PTFE.
Preparation
Due to the nature of this product, its expanding properties and excellent adhesion allow it to fill voids effectively. However, brushing the area is a good practice, as it removes any organic growth, small debris, dust, or grease.
Application
- Shake the can thoroughly for at least 20 seconds
- Open the cover and fold the tube perpendicular to the can
- Slightly moisten the surfaces with a water spray
- Fill the 1/3 of the void, allowing the expanding foam to fill the rest
- Ensure as you continue applying, you continue to shake the can in intervals
- If you're applying in layers, allow the one prior to cure, slightly moisten the surface and apply another layer on top
Limitations and Notes
- Any cured expanding foam must be removed mechanically.
- Uncured expanding foam can be wiped away with a wet cloth.
- Slightly moistened surfaces enhance curing, adhesive, and yield.
