Code 3 Cast Lead - 300mm x 6m 
Soudal Soudafoam Gap Filler Hand Held 750ml (Box of 12) 
Everbuild Caulk Once – White 380ml 
Ronseal 6 Year Anti Mould Paint - White Silk 2.5L 
Timco Lithium EP2 Grease - 400g 
FloPlast Half Round Union Unit - White 
Permavent Easy Slate 500 - Pack of 20 
Everbuild Lumberjack 550 Floor Adhesive – 600ml 
20 Boxes x Extra Large Head Clout Nails, Galvanised 
Ronseal Exterior Yacht Varnish - Satin 2.5L 
Bond It Aluminium Foil Tape - 75mm x 45M 
Everbuild KOS Black Fire Cement - 500g 
ALM Code 5 Milled Lead - 240mm x 6m 
Everbuild Constructa-Pro Adhesive Foam - Grey 750ml 
Ulti-Mate 10K Slate Vent Adaptor 
Soudal Gap Filler Expanding Foam Genius Gun 300ml - Champagne (Box of 12) 
ALM Code 3 Milled Lead - 760mm x 3m 
Ronseal Multi Purpose Wood Filler - Natural 930g 
ALM Code 8 Milled Lead - 240mm x 6m 
Soudal Soudabond 265 Classic Spray - 500ml 
OX Pro 7 Piece Screwdriver Set 
Cromar Bitumen Trowel Mastic - Black 1L 
Timloc Over Fascia Vent - 1m 
ALM Code 6 Milled Lead Flashing - 800mm x 3m 
Everbuild 404 Fungicidal Wash – 1 Litre 
Uses
One Coat Concrete Seal by Thompson's delivers excellent protection for concrete, and using its formulated acrylic resins in aromatic hydrocarbon, it provides a layer that seals the surface. This product repels various contaminants, including water, oil, grease and fuel spills.
Preparation
Scrub the surface with a stiff bristle brush, removing any dirt, dust or similar contaminants. Ensure that the area is well-ventilated and that you clean the surface before using a dedicated cleaner, but make sure that the surface is dry before commencing the application.
Application
Please note: the temperature and environmental conditions can affect this product's drying times.
- Give the tin a thorough stir.
- Pour the tin into a roller tray and apply a long pile roller directly to the surface in long, smooth strokes. (If applying to the garage floor, start from the furthest point from the door, working towards it.)
- Ensure when applying, any puddles are dispersed evenly, making the overall coat even.
- Certain surfaces, such as porous ones, may require a second coat 4 hours later.
Limitations
- Do not apply this product in the rain or if it is imminent during drying.
- New concrete must be allowed up to 30 days to cure fully.
- This product dries to a satin sheen finish; however, the sheen level depends on the substrate.
- The appearance of the surface may change with this product. So, test it on a small, inconspicuous surface before completing the entire application.
- Prevent any spillages from reaching vegetation or garden furniture.
- Avoid contact with plastics and rubber materials (including footwear) whilst wet.
- Remove any splashes whilst still wet with white spirit.
