Everbuild Opti-Mix Mortar Plasticiser - 1 Litre (Box of 12) 
Soudal Silicone Sealant Remover, Clear - 100ml 
Stanley Dynagrip Chisel Knife - 25mm 
Ronseal Ultra Tough Hardglaze Clear Varnish - 250ml 
Soudal Adhesive Remover - 400ml 
ERidge Dry Fix Ridge System Black – 6m Kit 
Code 5 Cast Lead - 1200mm x 3m 
Code 6 Cast Lead - 180mm x 6m 
SikaFlex EBT+ Polyurethane Adhesive & Sealant, Grey - 300ml (Box of 12) 
Everbuild 209 Liquid Mortar Tone - Black 1 Litre 
Ronseal Precision Finish Brush - 5 Pack 
Soudal B1 Fire Class Expanding Foam Handheld - 750ml 
Timco Flat Wood Bit Set 
Timloc Underlay Felt Lap Vent 
OX Pro Impact Bit Set - 11 Piece 
Klober Universal Tile Vent Antique Red KG9854 (Box of 10) 
Soudal Soudalead PB Lead Sealant - Grey 300ml (Box of 12) 
Everbuild 501 PVA - 1 Litre 
Ronseal Expanding Foam Filler - 300ml 
Code 7 Cast Lead - 300mm x 3m 
OX Pro Semi Round Dutch Pin, Swivel Arm - 4 Pack 
ALM Code 8 Milled Lead - 510mm x 6m 
FloPlast Half Round Gutter 90° Bend, Brown – 112mm 
Ronseal Stays White 2in1 Paint & Primer - Satin 750ml 
FrogTape® Multi-Surface Masking Tape - Green 36mm x 41.1m 
Soudal Neutral Stay Fresh Sanitary Silicone Sealant – White 300ml 
Ronseal Multi Purpose Smooth Finish Filler - 2.2Kg 
Cromar Bitumen Primer – Black 2.5 Litre 
Uses
The One Coat Roof Seal by Thompson's delivers excellent protection for your roof. It has been brewed by the scientist at Thompson's to provide long-lasting, durable protection that won't crack or warp in just one coat. Thompson's scientists achieved this by using a flexible membrane inside the paint, allowing a natural movement on the roof. They have infused the composite of this formula with added fibres, providing superior tensile strength and allowing it to bridge gaps, guaranteeing a complete waterproof finish. Surfaces that you can apply this product onto include;
- Felt
- Asphalt
- Slate
- Tiles
- Concrete
- Asbestos
- Corrugated Metal
- Wood
Preparation
Prepare the surface before starting the application. Complete this by removing all contaminants that can hinder the sealer. You should remove any organic growth present, and you can achieve this by using a dedicated cleaner to kill them thoroughly. If your surface has flaking loose bits, you should remove it with a stiff brush.
Application
- Using a brush, roller or soft broom, dip it into the paint or pour the paint into a tray and dip it into that.
- Apply the paint to the surface, ensuring an even thick spread across; otherwise, it will only work if it is thick enough.
- Allow 24 hours for the surface to dry and reach its optimal benefits.
