ALM Code 5 Milled Lead - 150mm x 6m 
Everbuild Jetcem Deep Rapid Repair Sand & Cement – 2kg 
FloPlast Half Round Downpipe Shoe, Brown – 68mm 
Easy-Trim Universal Dry Verge System Terracotta (Box of 50) 
Timco Cloth Tape White - 50m x 48mm 
Code 6 Cast Lead - 600mm x 3m 
FloPlast Half Round Gutter 135° - White 
Code 7 Cast Lead - 600mm x 3m 
Code 4 Cast Lead - 1000mm x 3m 
Permavent Black Breather Membrane – 1m x 20m 
201 Mortar Admix – 5 Litre 
FloPlast Universal Hopper, White – 65-68mm 
Soudal Fix ALL Flexi – Grey 290ml (Box of 12) 
Klober Single Pantile Vent - Brown KG9860-0247 (Box of 10) 
Soudal Repair Express Cement – Grey 290ml (Box of 12) 
Ronseal Knot Block Primer & Undercoat - White 2.5L 
Timloc Castellated Tile Vent Red (Box of 8) 
The Eaves Vent Roll Out Rafter Tray by Timloc is an outstanding product that enables ventilation to your roofing system, combating condensation and aiding the structural integrity of the building. It has been quality tested against various regulations and standards, and it has passed the following;
- All NHBC Requirements
- BS EN ISO 9001
- BS EN ISO 14001
- All Building Standards
- All relevant Building Regulations
Installation
Unroll the ventilator along the rafters, and this should be along the entire length of the eaves on both sides of the building, creating a cross-flow ventilation action.
Position centrally above the wall plates because it's the narrowest part of the roof and is most likely to constrict the airflow of the roof insulation.
Push the corrugations down over the top of the rafters and secure them using clout nails or staples.
