Bond It Decking Cleaner - Clear 5L 
Code 7 Cast Lead - 510mm x 3m 
Timco FirmaHold Collated Brad A2 Stainless Steel Nails - 16G x 50mm (2000 Pieces) 
Thompson's One Coat Damp Seal - White 250ml 
Everbuild Everflex Contract 700T LMN Silicone - Bronze (Box of 25) 
Code 3 Cast Lead - 850mm x 6m 
Bond It A70 Studlock Anaerobic High Strength Adhesive - 50ml Green 
ALM Code 8 Milled Lead - 450mm x 6m 
ALM Code 3 Milled Lead - 360mm x 6m 
Code 8 Cast Lead - 1200mm x 3m 
Code 4 Cast Lead - 914mm x 6m 
ALM Code 7 Milled Lead - 760mm x 3m 
Roughneck® Gorilla Bar Twin Pack - 35cm & 55cm (14in & 22in) 
Soudal Adhesive Remover - 400ml 
Bond It PVCu Solvent Free Cream Cleaner - White 1L 
Bond It B2 Expanding PU Foam - Beige 750ml 
Everbuild PVCu Acti-Spray – Clear 200ml (Box of 12) 
Permavent Easy Slate 600 - Box of 100 
Freeflow 65mm Square Down Pipe Connector - Black 
Bond It Cover-It Hardfloor & Glass Protector - Blue 625mm X 50M Dry Fix Accessories
Best Sellers
-
Ronseal Multi Purpose Wood Filler – Natural 930g
£14.99 Incl VAT £12.49 Excl VAT Add to basket -
ALM Code 4 Milled Lead – 240mm x 3m
£42.48 Incl VAT £35.40 Excl VAT Add to basket -
Oxyturbo Oxygen Refill
£27.95 Incl VAT £23.29 Excl VAT Read more -
Soudal Trade All Weather Sealant – Clear 290ml (Box of 12)
£66.00 Incl VAT £55.00 Excl VAT Add to basket -
Bond It Professional Foam Gun Applicator
£12.99 Incl VAT £10.83 Excl VAT Add to basket -
Thompson’s One Coat Damp Seal – White 750ml
£22.03 Incl VAT £18.36 Excl VAT Add to basket
Dry Fix Accessories
While it is common to sometimes mortar in the ends of the roof verge even in a structure that is otherwise dry fix, for roofers looking for a totally dry tiling arrangement the Easy Trim End Cap and Starter Unit are vital. These are both made of a polypropylene polymer that is highly resistant to heat, weather, and UV rays. In addition, both are totally watertight, protecting the vulnerable underbelly of the verge tiles from the weather and also any wayward wildlife.
Why should I use an End Cap and Starter Unit?
The End Cap and Starter Unit are important because they serve to seal off each end of a set of verge tiles without any need for mortaring. The less a roof relies on mortaring, the more resistant to the weather it is and the more it can flex to absorb damage.
The Starter Unit is mounted where the verge meets the eaves of the roof. The End Cap on the other hand is mounted where the verge meets the ridge at the top of the roof. Both are critical to implementing a full dry fix roof.
